Leia costume. Belt and boots

[NoeSkywalker ()]

Hi everyone! I finished my costume of Leia ANH following the forum, but I have doubts about my boots and belt.
This is my boots

https://www.dropbox.com/s/2vqu2gcry1w0bz4/boots.jpeg?dl=0

and this is my belt

https://www.dropbox.com/s/ixm8jsqzwec5of3/belt.jpeg?dl=0

What do you think?Are could be approved ?

Thank you every one!!
_________________
Help me Obi-Wan Kenobi, you are my only hope.

[Lora Skywalker ()]

Hello

I'll say I'm worried about your boots. The heel looks a bit high and there's a fair deal of slouching on the boot. It might pass if you straighten the slouching part out, but I'm not sure about the heel.

The belt looks like it might need a backing to make it more rigid. What does it look like when you wear it?
_________________


Nordic Base BMO | DL of Aurora Delegation | CRC | She/Her They/Them

RLGS Detachment website: http://www.senate.rebellegion.com/

[NoeSkywalker ()]

Hi!!!
Firs at all, thank you for the answer!
I read that the measure of the heel of the boots should be between 4 to 5 cm and my heel measure 4,5 cm... can be approved? And when you say “slouching part” you want to say the crease of the boots?? Sorry my english is not advanced and the translation of the tranlator is so weird haha
Regarding to belt, I didn’t find a more rigid material... I think that I’m going to put inside a rigid material.
My belt look like this

https://www.dropbox.com/s/72mh1q74bi8e5si/Foto%209-2-18%2017%2005%2005.jpg?dl=0

In the dress look like the same form
_________________
Help me Obi-Wan Kenobi, you are my only hope.

[Lora Skywalker ()]

Yes, the crease on the boots was what I was talking about.

And you can always back your belt with a more rigid material so there is not risk of it creasing, too.
_________________


Nordic Base BMO | DL of Aurora Delegation | CRC | She/Her They/Them

RLGS Detachment website: http://www.senate.rebellegion.com/