Endor Trooper Soft Pack hose and greebs.

Iron Edge (Ian Cook)

Hello all!

I am looking for the two Greeblies and the best black hose to add to my endor trooper backpack (see below) Any help is much appreciated!

_________________

Dr8072 () · Posted: Wed Nov 09, 2016 10:50 pm Post subject:

Before my black hose I used the black covering of gas pipes, or you could use the washing machine hose...
It's about an inch thick...
I connected it to the pocket using a garden hose connector to make it smooth

For the greeblies I send you a pm
_________________
Oh that first view of Tatooine... I was lost forever

moselder71 (Todd Barclay) · Posted: Tue Jun 20, 2017 10:34 pm Post subject: endor pack hose and greeblies

can someone post a picture of this? where the placement of the hose goes and how it attaches and all? Thanks

jthatcher (Jim Thatcher) · Posted: Wed Jun 21, 2017 1:13 am Post subject:

Here's a pic of my pack. The hose is attached inside the main compartment and runs down the right side of the pack. I cut a hole in the side of the right pocket toward the bottom and used a pipe fitting to add detail. Hope that helps!
_________________

Jim Thatcher
RAID: Endor Commando, Rebel Marine (Scarif) - 307th Desert Rats
COR: Captain Rex - Anooba Squad
KJO: Luke Skywalker (Death Star Duel) - Temple Arkanis

Terran S (Terran Stewart) · Posted: Wed Jun 21, 2017 7:25 pm Post subject:

I built my own greblies, so can't help you there, but as for mounting: I didn't want to cut any holes in my pack or do any extra stitching, so I simply pass the upper end of the hose through the cordage at the top flap, then glued a rare earth magnet into the other end of the hose. I positioned a small steel plate inside the pack and the magnet does the rest.

JohnMorog () · Joined: 27 Sep 2016 Posts: 38 Medals: None

The 3d printing files for the greeblies can be found here:
https://groups.yahoo.com/neo/groups/endorbunker/files

You need to create a Yahoo! account to access the files.

moselder71 (Todd Barclay) · Posted: Tue Jun 27, 2017 10:58 pm Post subject: endor canvas pack

my question is where did the black hose come from? looking at the costume standards, which does not mention the black hose and the book star wars costumes of the original clothing and such i see no black hose attached to the canvas pack. so is it necessary or not for approval?

jthatcher (Jim Thatcher) · Posted: Wed Jun 28, 2017 12:06 pm Post subject:

It came from this reference photo:

The soft pack is optional, so you can be approved without it. 100% accurate packs would have the tube and greeblies, but you can be approved without both.
_________________

Jim Thatcher
RAID: Endor Commando, Rebel Marine (Scarif) - 307th Desert Rats
COR: Captain Rex - Anooba Squad
KJO: Luke Skywalker (Death Star Duel) - Temple Arkanis

Iron Edge (Ian Cook) · Posted: Wed Jun 28, 2017 1:56 pm Post subject:

Thanks everyone!

I got my 3d printed greebs and hose on my pack, I think it turned out awesome! I used strong magnets to attach the hose so i didnt have to damage the backpack. With my new jacket and backpack, my endor trooper V2 is now approved. I also made a bunker buster bomb but needless to say I don't take it to many events...

_________________

moselder71 (Todd Barclay) · Posted: Fri Jun 30, 2017 2:57 pm Post subject: endor soft pack no hose

So there is a picture in the Star Wars costume book of the softpack with no hose on the softpack. So my question is we have pictures of the softpack with and without the hose, so are both acceptable?

moselder71 (Todd Barclay) · Posted: Fri Jun 30, 2017 4:12 pm Post subject:

Here is the picture I am talking about from the Star Wars costume book, hope my link works

http://s473.photobucket.com/user/moselder71/library/endor%20soft%20pack%20no%20hose

jthatcher (Jim Thatcher) · Posted: Fri Jun 30, 2017 7:55 pm Post subject: Re: endor soft pack no hose

captainbiscuit9999 (Ben Salisbury) · Posted: Sat Jul 01, 2017 1:35 am Post subject:

Ian your backpack looks great! I may have to make one one of these days...

Jayse001 () · Posted: Tue Dec 01, 2020 10:15 am Post subject:

I'm currently building my own Endor Commando. But I can not find the files for the pack greeblies. And the link posted here does not seem to work anymore, can someone help please.
Thanks
_________________

X-Wing Resistance Pilot
Rogue One Rebel Marine
Jedi Knight

PArmstr (Patricia Armstrong-Krauss) · Posted: Tue Dec 01, 2020 12:09 pm Post subject:

Yahoo closed down the yahoo groups. The files and tutorials were transferred to Schph's Rebel Trooper Costume Builders Aid Society on Facebook. I found not find any 3D-print files there so you might have to ask Schph if she has any. https://www.facebook.com/groups/842066172863260/files

Another good source for info and files is the facebook-group Endor Rebel Commando Costume Armory https://www.facebook.com/groups/1567290883392672
or thingiverse.com.
_________________
RIAD GRRRL-Squad-Leader 2019-present

Costumes: Jawa, RFT ANH, Signals Intelligence Technician, Rebel Vanguard (Hasbro), EA BF1 Female DRT, Senior Officer, Yavin Operations Officer and Trooper, Scarif Marine

WIPs: EA BF 2 Tatooine Specialist, EA BF female Bespin Trooper, 2nd Scarif Marine

Forum and Costume Controls