Forum and Costume Controls

   FAQFAQ  SearchSearch  MemberlistMemberlist   UsergroupsUsergroups  medals.php?sid=6460e4f07a08104e6539717d200592bbMedals   RegisterRegister   ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in

       
REMINDER: Do not change your e-mail address yourself. Please read this first for why.

[New Standard] Ahsoka Tano of Star War Rebels

 
Post new topic   This topic is locked: you cannot edit posts or make replies.    Rebel Legion Forum Index -> Costume and Prop Making -> Jedi -> KJO Standards Development -> KJO Standards Archive
View previous topic :: View next topic  

Do you approve of this standard for Ahsoka Tano of Star War Rebels?
Yes
83%
 83%  [ 5 ]
No
16%
 16%  [ 1 ]
Users Voted : 6
Total Votes : 6
This poll has expired.
Detailed Results

Author Message
Oraculo (Agustín)
Detachment CO
Detachment CO


Joined: 15 Apr 2013
Posts: 6722
Location: Buenos Aires - Argentina
Medals: 1 (View more...)
Gold Star (Amount: 1)

PostPosted: Wed Jun 15, 2016 4:01 am    Post subject: [New Standard] Ahsoka Tano of Star War Rebels Reply with quote

Hello Everyone!

The Costume Standards Committee has proposed the new standard about Ahsoka Tano of Star Wars Rebels NEW

And the first stage is complete. In this second stage, the member of KJO Detachment have to vote on whether to approve or not approve the proposed standards

Voting will be open for 3 days.


General Discussion

http://www.forum.rebellegion.com/forum/viewtopic.php?t=74807

Ahsoka Tano of Star Wars Rebels Standard Costume Specifications

Author: Ahsoka94 (Eleonora Scanu)

Changes proposed by Past

Wording changes
Addition
To remove

1. Togruta lekku in white with blue unequal stripes as similar as possible to reference image, dark plum/ dark claret and silver colored diadem that reaches the cheekbones , the central diamond has to be of a slightly brighter silver. The lekku materials have to give a skin effect. They have to reach down the chest.

2. Dark grey dress, elastic and tight cloth, small V rip on the neck that can’t be seen the end as it is covered from the armor. The cloth has to reach the neck and follow behind forming a collar. The opening of the sleeves has to show a large part of the shoulder. The front skirt has to have a U shape and be a little bit shorter behind.

3. Gloves coverings the arms made of the same fabric and color as the dress , they have to reach quite high on the arms and be quite tight, they have to have a half circle opening onto the high part and an opening to place a thumb in the low part.

4. Leggings or covering black or dark grey or dark brown socks.

5. Grey under belt lighter than the dress, with a chamois effect fabric. It has to be narrower in front below the navel more or less at the belt hole, and open as a wave onto the sides, then close behind slightly larger than in front.

6. Skin black or dark brown belt or skin alike that closes in front, on both sides on a grey colored ring, hanging is another small belt piece towards the lower part to which the armor is connected, at the back exactly in the center there has to be a rectangular part slightly bigger, from where is starting towards a low part a small segment to which is connected a small segment is used to hang a part of the armor. On the 2 corners of the 2 edges of the belt and in the center of the small piece hanging in front, they have to be some small grey buttons. There are 4 silver/grey buttons at the corners of the rectangle pieces in the back, 2 on the edges on the belt were it closes in front, and 1 on the piece were the armor hangs at the front.

7. Armor parts:

a) chest part: rounding shape that starts over the chest and reaches up to the end of [color=green]the
breastbone, large up to the beginning of the underarm. Dark plum /dark garnet color in the center, with a half centimeter silver edge, possibly the gap between the two colors has to be interrupted by a groove in order to better show the depth. In the low part center there has to be a triangle with rounding angles of the same color as the piece with 2 “buttons”: the upper one smaller and light orange, the lower one bigger and yellow.

b) forearm part and hands: silver color with dark plum/ dark garnet stripes on the sidethat are leaving from the hand part and continuing to the forearm. They are curving toward the outside at the end, they have to have a rounding shape and similar to the one of your forearm. In the middle lifted and of the same color as the stripes, there is a long shape with round endings it has to be longer an rounding on the sides stripe, over that there is 3 buttons: 2 smaller, yellow, close and 1 bigger and orange a little bit further away, this is either on both the left and the right forearm. No connecting materials (straps) have to be visible from the armor pieces to the fabric(use straps). The hands parts have to be separated from the forearm ones by about 1 cm and continue the shape, the end is round further to that they are round and leave uncovered more the hand than the pinkie. They have to cover the knuckles and cover over the junction of the pinkie. Take care all 4 All parts have a white color worn effect.

c) right and lefts side parts: sand color with silver edges, possibly separated by a groove that highlights the gap. They have to be connected to the under belt and have to cover the thigh in the width, they have to a little bit longer that the dress skirt. They have to have the geometric drawing, (not engraved) in light brown proportional to the piece. In the upper part, in the center, highlighted it has to be the there is black lightsaber hanger with silver hook. The upper part that faces the front has a pointed shape while the part behind has a rounded shape

d) front part: connected to the belt, sand color with silver edges possibly separated by a groove that highlights the gap, geometric drawing light brown color. It has to reach a little bit below the end of the skirt and be proportional to the body and to sides parts.

e) 3 rear parts: all 3 parts have to be sand color with silver edges, possibly separated by a groove that highlights a gap, only the central part has to hang down the belt and have the geometric drawing light brown, the shape has to be similar to a beer tankard and be separated by other two pieces on right and left about 1 cm, these have to continue the shape of the central part and cover proportionally the bottom, these 2 parts have to be connected to the dress skirt and have to be longer than that.

f) Shin and calf parts: knee covering where the point has to reach the upper part of the knee, sand color same as the stripe that comes down up to half shoe, all the remaining part are of a silver color. The color separation line is engraved and the parts lines that reach behind the calf. There is a white worn effect. The shape has to follow your calf lines and be completely closed behind. Upper right and left have to have a bow shape and then close behind and join horizontally. Below on the sides they have to have a bow shape and join behind horizontally. There's 2 elastic black stripes, 1 right and 1 left, that close below the sole and attach the shin armor to the shoes.

8. shoes: silver color ankle boot, with small heel, sand color line that closes at half shoe and reaches the armor piece on the shin.

9. 2 white lightsabers, one longer and one shorter with silver hilts also these one longer and one shorter, no lightsabers toys, alternatively hilt similar to the ones of the character not working to hang to the costume.
10. Make-up: orange color skin with white drawings, covered eyebrows and dark brown lipstick.

11. Blue eyes.

Images





http://www.directupload.net/file/u/9196/ysofd5k6_jpg.htm
http://www.directupload.net/file/u/9196/ijkj234i_jpg.htm
http://www.directupload.net/file/u/9196/rjo5ewew_jpg.htm
http://www.directupload.net/file/u/9196/sbzkc362_jpg.htm
http://www.directupload.net/file/u/9196/bkzl28tq_jpg.htm
http://www.directupload.net/file/u/9196/7ckv6utc_jpg.htm
http://www.directupload.net/file/u/9196/fhl7mm9f_jpg.htm
http://www.directupload.net/file/u/9196/72s36smi_png.htm

Best Regards!
_________________
•Detachment CO - KJO 2014 - Present
Member of the Letter Amendment Committee 2017-2018
•Legion Costume Judge
•BCO Cruz del Sur Base 2016 - 18
•BPRO Cruz del Sur Base 2016 - 17
•Award: Rebel of the Year 2015
•TCO Templo Pucará 2015-16
•Detachment XO - KJO 2014-15
•RO Cruz del Sur Base 2013 -14



Last edited by Oraculo (Agustín) on Wed Jun 15, 2016 6:28 pm; edited 1 time in total
Back to top
View user's profile Send private message Send e-mail
Past (Audrey)
Active Legion Member


Joined: 19 Apr 2016
Posts: 80
Location: Montreal, Canada
Medals: None

PostPosted: Wed Jun 15, 2016 3:08 pm    Post subject: Reply with quote

Voted to not approve, not because I dont agree with the standards, but because I think the wording is confusing in some places (because of translations issues), making the standards unclear as they are right now. Might I suggest some wording changes for clarity purpose? :

Wording changes
Addition
To remove

Quote:

1. Togruta lekku in white with blue unequal stripes as similar as possible to reference image, dark plum/ dark claret and silver colored diadem that reaches the cheekbones , the central diamond has to be of a slightly brighter silver. The lekku materials have to give a skin effect. They have to reach down the chest.


I replaced coronet with diadem. A coronet is ''a small crown consisting of ornaments fixed on a metal ring'' while a diadem is ''a type of crown, specifically an ornamental headband worn''. I'm pretty sure the correct term in this case would be diadem (or simply headband)

Quote:

3. Gloves coverings the arms made of the same fabric and color as the dress , they have to reach quite high on the arms and be quite tight, they have to have a half circle opening onto the high part and an opening to place a thumb in the low part.


Quote:
5. Grey under belt lighter than the dress, with a chamois effect fabric. It has to be narrower in front below the navel more or less at the belt hole, and open as a wave onto the sides, then close behind slightly larger than in front.


Quote:
6. Skin black or dark brown belt or skin alike that closes in front, on both sides on a grey colored ring, hanging is another small belt piece towards the lower part to which the armor is connected, at the back exactly in the center there has to be a rectangular part slightly bigger, from where is starting towards a low part a small segment to which is connected a small segment is used to hang a part of the armor. On the 2 corners of the 2 edges of the belt and in the center of the small piece hanging in front, they have to be some small grey buttons. There are 4 silver/grey buttons at the corners of the rectangle pieces in the back, 2 on the edges on the belt were it closes in front, and 1 on the piece were the armor hangs at the front.


This was the most confusing segment of the proposed standards.


Quote:
a) chest part: rounding shape that starts over the chest and reaches up to the end of the breastbone, large up to the beginning of the underarm. Dark plum /dark garnet color in the center, with a half centimeter silver edge, possibly the gap between the two colors has to be interrupted by a groove in order to better show the depth. In the low part center there has to be a triangle with rounding angles of the same color as the piece with 2 “buttons”: the upper one smaller and light orange, the lower one bigger and yellow.


Quote:
b) forearm part and hands: silver color with dark plum/ dark garnet stripes on the sidethat are leaving from the hand part and continuing to the forearm. They are curving toward the outside at the end, they have to have a rounding shape and similar to the one of your forearm. In the middle lifted and of the same color as the stripes, there is a long shape with round endings it has to be longer an rounding on the sides stripe, over that there is 3 buttons: 2 smaller, yellow, close and 1 bigger and orange a little bit further away, this is either on both the left and the right forearm. No connecting materials (straps) have to be visible from the armor pieces to the fabric(use straps). The hands parts have to be separated from the forearm ones by about 1 cm and continue the shape, the end is round further to that they are round and leave uncovered more the hand than the pinkie. They have to cover the knuckles and cover over the junction of the pinkie. Take care all 4 All parts have a white color worn effect.


Blue part is my own addition, since I believe it's missing a part? It didn't mention what had to be lifted and of the same color as the chest. Also it was discussed in the discussion board that both sides had the buttons, but it still said 'either'.

I'm not sure what ' further to that they are round and leave uncovered more the hand than the pinkie.' meant?

Quote:
c) right and lefts side parts: sand color with silver edges, possibly separated by a groove that highlights the gap. They have to be connected to the under belt and have to cover the thigh in the width, they have to a little bit longer that the dress skirt. They have to have the geometric drawing, (not engraved) in light brown proportional to the piece. In the upper part, in the center, highlighted it has to be the there is black lightsaber hanger with silver hook. The upper part that faces the front has a pointed shape while the part behind has a rounded shape


Quote:
f) shin and calf parts: knee covering where the point has to reach the upper part of the knee, sand color same as the stripe that comes down up to half shoe, all the remaining part are of a silver color. The color separation line is engraved and the parts lines that reach behind the calf. There is a white worn effect. The shape has to follow your calf lines and be completely closed behind. Upper right and left have to have a bow shape and then close behind and join horizontally. Below on the sides they have to have a bow shape and join behind horizontally. There's 2 elastic black stripes, 1 right and 1 left, that close below the sole and attach the shin armor to the shoes.


and the parts lines that reach behind the calf. not sure what this is refering to.
Back to top
View user's profile Send private message Send e-mail Visit poster's website
Oraculo (Agustín)
Detachment CO
Detachment CO


Joined: 15 Apr 2013
Posts: 6722
Location: Buenos Aires - Argentina
Medals: 1 (View more...)
Gold Star (Amount: 1)

PostPosted: Wed Jun 15, 2016 6:32 pm    Post subject: Reply with quote

Hello Past !

I was rereading the proposal again. You suggest changes greatly improve the Costume Standard. I edited the original proposal with yours modifications, for those members who vote KJO take into account the latest changes.

Thank you very much for your suggestions and proposed changes

Best Regards!
_________________
•Detachment CO - KJO 2014 - Present
Member of the Letter Amendment Committee 2017-2018
•Legion Costume Judge
•BCO Cruz del Sur Base 2016 - 18
•BPRO Cruz del Sur Base 2016 - 17
•Award: Rebel of the Year 2015
•TCO Templo Pucará 2015-16
•Detachment XO - KJO 2014-15
•RO Cruz del Sur Base 2013 -14

Back to top
View user's profile Send private message Send e-mail
JEDICHRIST (DELONG.CHRISTOPHE)
Legion Costume Judge
Legion Costume Judge


Joined: 05 Oct 2008
Posts: 465
Location: FRANCE
Medals: 2 (View more...)
Paris Support Badge (Amount: 1)

PostPosted: Fri Jun 17, 2016 1:28 pm    Post subject: Reply with quote

voted
_________________
Squadron Commander of the RLFB "Corellian Griffons" since 2013
XO RLFB 2011-2014
MO RLFB 2010-2011
First Temple Master 2012 2013 of "Six Towers Jedi Temple"
member of Rebel Legion Knights of the Jedi Order detachment
member of Rebel Legion Starfighter Command Detachment
Back to top
View user's profile Send private message Send e-mail Visit poster's website
Oraculo (Agustín)
Detachment CO
Detachment CO


Joined: 15 Apr 2013
Posts: 6722
Location: Buenos Aires - Argentina
Medals: 1 (View more...)
Gold Star (Amount: 1)

PostPosted: Sat Jun 25, 2016 6:18 pm    Post subject: Reply with quote

Costume Standard approved!! Very Soon, final version!

Thank you so much!!

Yours
Agustin DCO KJO
_________________
•Detachment CO - KJO 2014 - Present
Member of the Letter Amendment Committee 2017-2018
•Legion Costume Judge
•BCO Cruz del Sur Base 2016 - 18
•BPRO Cruz del Sur Base 2016 - 17
•Award: Rebel of the Year 2015
•TCO Templo Pucará 2015-16
•Detachment XO - KJO 2014-15
•RO Cruz del Sur Base 2013 -14

Back to top
View user's profile Send private message Send e-mail
Oraculo (Agustín)
Detachment CO
Detachment CO


Joined: 15 Apr 2013
Posts: 6722
Location: Buenos Aires - Argentina
Medals: 1 (View more...)
Gold Star (Amount: 1)

PostPosted: Fri Jul 01, 2016 2:12 pm    Post subject: Reply with quote

Hello Everyone

The KJO Members approved the New Costume Standard of Ahsoka Tano - Star Wars Rebels. Step 2 completed

Final Version approved with new modifications

Quote:
Ahsoka Tano - Star Wars Rebels

Author: Ahsoka94 (Eleonora Scanu) and Past ((Audrey)

1. Togruta lekku in white with blue unequal stripes as similar as possible to reference image, dark plum/ dark claret and silver colored diadem that reaches the cheekbones, the central diamond has to be of a slightly brighter silver. The lekku materials have to give a skin effect. They have to reach down the chest.

2. Dark grey dress, elastic and tight cloth, small V rip on the neck that can’t be seen the end as it is covered from the armor. The cloth has to reach the neck and follow behind forming a collar. The opening of the sleeves has to show a large part of the shoulder. The front skirt has to have a U shape and be a little bit shorter behind.

3. Gloves coverings the arms made of the same fabric and color as the dress , they have to reach quite high on the arms and be quite tight, they have to have a half circle opening onto the high part and an opening to place a thumb in the low part.

4. Leggings or covering black or dark grey or dark brown socks.

5. Grey under belt lighter than the dress, with a chamois effect fabric. It has to be narrower in front below the navel more or less at the belt hole, and open as a wave onto the sides, then close behind slightly larger than in front.

6. Skin black or dark brown belt or skin alike that closes in front, on both sides on a grey colored ring, hanging is another small belt piece part to which the armor is connected, at the back exactly in the center there has to be a rectangular part slightly bigger, from where a small segment is used to hang a part of the armor. There are 4 silver/grey buttons at the corners of the rectangle pieces in the back, 2 on the edges on the belt were it closes in front, and 1 on the piece were the armor hangs at the front.

7. Armor parts:

a) chest part: rounding shape that starts over the chest and reaches up to the end of the breastbone, large up to the beginning of the underarm. Dark plum /dark garnet color in the center, with a half centimeter silver edge, the gap between the two colors has to be interrupted by a groove in order to better show the depth. In the low part center there has to be a triangle with rounding angles of the same color as the piece with 2 “buttons”: the upper one smaller and light orange, the lower one bigger and yellow.

b) forearm part and hands: silver color with dark plum/ dark garnet stripes on the side leaving from the hand part and continuing to the forearm. They are curving toward the outside at the end, they have to have a rounding shape similar to the one of your forearm. In the middle lifted and of the same color as the stripes, there is a long shape with round endings, over that there is 3 buttons: 2 smaller, yellow, close and 1 bigger and orange a little bit further away, this is on both the left and the right forearm. No connecting materials (straps) have to be visible from the armor pieces to the fabric. The hands parts have to be separated from the forearm ones by about 1 cm and continue the shape, the end is round. They have to cover the knuckles and cover over the junction of the pinkie. All parts have a white color worn effect.

c) right and lefts side parts: sand color with silver edges, possibly separated by a groove that highlights the gap. They have to be connected to the under belt and have to cover the thigh in the width, they have to a little bit longer that the dress skirt. They have to have the geometric drawing, (not engraved) in light brown proportional to the piece. In the upper part, in the center, there is black lightsaber hanger with silver hook. The upper part that faces the front has a pointed shape while the part behind has a rounded shape

d) front part: connected to the belt, sand color with silver edges possibly separated by a groove that highlights the gap, geometric drawing light brown color. It has to reach a little bit below the end of the skirt and be proportional to the body and to sides parts.

e) 3 rear parts: all 3 parts have to be sand color with silver edges, possibly separated by a groove that highlights a gap, only the central part has to hang down the belt and have the geometric drawing light brown, the shape has to be similar to a beer tankard and be separated by other two pieces on right and left about 1 cm, these have to continue the shape of the central part and cover proportionally the bottom, these 2 parts have to be connected to the dress skirt and have to be longer than that.

f) Shin and calf parts: knee covering where the point has to reach the upper part of the knee, sand color same as the stripe that comes down up to half shoe, all the remaining part are of a silver color. The color separation line is engraved and the parts lines that reach behind the calf. There is a white worn effect. The shape has to follow your calf lines and be completely closed behind. Upper right and left have to have a bow shape and then close behind and join horizontally. Below on the sides they have to have a bow shape and join behind horizontally. There's 2 elastic black stripes, 1 right and 1 left, that close below the sole and attach the shin armor to the shoes.

8. shoes: silver color ankle boot, with small heel, sand color line that closes at half shoe and reaches the armor piece on the shin.

9. 2 white lightsabers, one longer and one shorter with silver hilts also these one longer and one shorter, no lightsabers toys, alternatively hilt similar to the ones of the character not working to hang to the costume.
10. Make-up: orange color skin with white drawings, covered eyebrows and dark brown lipstick.

11. Blue eyes.

Images





http://www.directupload.net/file/u/9196/ysofd5k6_jpg.htm
http://www.directupload.net/file/u/9196/ijkj234i_jpg.htm
http://www.directupload.net/file/u/9196/rjo5ewew_jpg.htm
http://www.directupload.net/file/u/9196/sbzkc362_jpg.htm
http://www.directupload.net/file/u/9196/bkzl28tq_jpg.htm
http://www.directupload.net/file/u/9196/7ckv6utc_jpg.htm
http://www.directupload.net/file/u/9196/fhl7mm9f_jpg.htm
http://www.directupload.net/file/u/9196/72s36smi_png.htm


Best Regards!
_________________
•Detachment CO - KJO 2014 - Present
Member of the Letter Amendment Committee 2017-2018
•Legion Costume Judge
•BCO Cruz del Sur Base 2016 - 18
•BPRO Cruz del Sur Base 2016 - 17
•Award: Rebel of the Year 2015
•TCO Templo Pucará 2015-16
•Detachment XO - KJO 2014-15
•RO Cruz del Sur Base 2013 -14

Back to top
View user's profile Send private message Send e-mail
Display posts from previous:   
Post new topic   This topic is locked: you cannot edit posts or make replies.    Rebel Legion Forum Index -> Costume and Prop Making -> Jedi -> KJO Standards Development -> KJO Standards Archive All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can post calendar events in this forum
The Rebel Legion is a worldwide Star Wars costuming organization comprised of and operated by Star Wars fans. While not sponsored by Lucasfilm Ltd., it is Lucasfilm's preferred volunteer Rebel costuming group. Star Wars, its characters, costumes, and all associated items are the intellectual property of Lucasfilm. © 2018 Lucasfilm Ltd. & ™ All rights reserved. Used under authorization.


Powered by phpBB © 2001, 2005 phpBB Group