Well, it COULD be that I posted this not long after I woke up, or it could be that Elmer Fudd was giving you a compliment
Oh I actually LOVE 'awazing'!
Never mind that Breha is Leia's mom. Or Bail's wife, or queen of Alderaan for that matter.
No, as I learned through discussions about this gown, Breha is apparently universally just known as "the woman with the Oh God sleeves'.
Therefore, the gown shall henceforth be known as the awazing sleeves gown. Well to me that is (and probably to many others who follow this thread).
You're probably not aware of this, but if we all just use that expression often enough and in many places, the generations after us will still know it as the awazing sleeves gown!
(Now who's suggesting to Maggie that the name MUST be changed on Padawansguide?)
By the way, did anyone ever notice that Breha's overdress has princess seams? Or rather that the 'front' part of the dress is three pieces - center and both sides?
You can see that best in the fourth of Freya's exhibit pics at Padawansguide; there's clearly a seam on the right side of her breast (the left side is covered by the veil). The bottom part of that side seam can be seen in the pictures that show the side of the skirt. The layout of the symbol pattern, particularly around the chest, is so clever that you can barely see that seam.
I find that endlessly interesting since I first thought that the pattern of that overdress had to be the same 'tent' shape without any seams at the front like Padmé's Episode 3 final purple Senate gown has. But it doesn't.
Also, and I'm not sure if I mentioned that before, but those oval symbols on her gown? On the upper two rows of the center front and the lower two rows of the side parts of her gown, the symbols are smaller than everywhere else on the dress. You can see that if you compare the size of the symbol where the 'key hole' opening at the neckline is to the other symbols *below* that key hole opening.
Anyway, I've developed a pattern for the center front and side front part from those symbols on the gown and carefully counting / drafting from the exhibit pics to a digitized, seamless version of the fabric with the symbols. Of course I had to "guess" in quite a few places where the dress is hidden by the veil and / or her arms; but that guessing combined with knowing what dress patterns generally look like works pretty well.
Here's what I came up with:
The missing center back and side parts can be made using the front parts; it's just that you'll have to flatten the 'bust' curve of the side parts if you do (to approximately the center of the symbol that the bust curve goes 'around'). Also remember that the center back must be split because there HAS to be a zipper. _________________ ~*~ Love of my life: Creating costumes! ~*~
Amidala Red Invasion
[quote="Naergi"]By the way, did anyone ever notice that Breha's overdress has princess seams? Or rather that the 'front' part of the dress is three pieces - center and both sides?
Yes!! This costume has been on my list for quite some time, just not at the top right now (other projects to finish). In my research/planning, I went through some of my patterns to find one I could modify for the overdress, specifically one that had princess seams. I did find one, but have not had time to work with it yet.
Great work so far! _________________ Costuming Site: http://lavcostumingjournal.blogspot.com
TPM Black Invasion Gown (complete)
ESB Hoth Leia (80% complete)
Bespin Escape Leia (all finished except the pix!)
Breha Organa (Planning/acquiring materials; dye testing)
PadmeSkywalker (Carrie Christian) Active Legion Member
Joined: 29 Apr 2007 Posts: 166
Posted: Mon Dec 31, 2012 11:46 pm Post subject:
I do have princess seams in my gown
As for the sleeve support--I do have wire that I need to stitch in there somewhere I did not use stabilizer--but I did use a double layer of the fabric, which is a relatively "heavy" fabric. I also need to figure out how to add some of the sparkle that her gown has to my fabric--in certain light, it does have a bit of a sparkle to it, just not the right shade.
Watch that video from beginning to end (and yes, it's long, but totally worth it!).
I bet that *latest* at around 14:30, when the edge of the suffibulum is folded back, you'll have a true Breha hairstyling moment (I already had it at about 8:29, when the structural vitta was wrapped).
In other words, the sini crenes is definitely the kind of hairstyle I want to wear with my Breha costume; and with my waist long hair, I can actually pull it off
I just have to modify the setup for the structural vitta and infula; but hey - with the decorative brooch on Breha's veil, even the fibula is present somehow, even if that brooch is much further down on the veil than the fibula on the Vestal hairdress.
Anyone agreeing that Breha's hairstyle and veil is probably based on the Vestal Virgin hairdo after seeing this video?
Did I mention my fabrics have arrived? The skirt / sleeves and overdress fabric, that is - still have to get some silk georgette for the veil, since I want to dye that together with the overskirt fabric. Silk chiffon just won't do IMHO, it's too flimsy and lightweight for that veil. _________________ ~*~ Love of my life: Creating costumes! ~*~
Amidala Red Invasion
I received my fabrics and dyed the skirt/sleeves fabric to a medium blue shade (blend of navy and cobalt blue dye).
Then I started by painting the fabric to achieve the 'Aurora Borealis' look of the original fabric. For that, I thoroughly wet the fabric (since that allows the paint to spread easier), and then just started painting it with a foam brush and four different silk paint colors: Blue, red, green and lavender.
I know, it looks weird. But the silk paint IS spreading, and therefore that painted effect becomes WAY less obvious after the paint has spread on the wet fabric and the fabric has eventually dried.
Here are pictures I took after the fabric dried.
Left side of picture shows the fabric in daylight (which almost matches the skirt fabric's color from the official photos, which was taken under studio light); right side of picture shows the fabric being photographed using a flash.
Note that since the exhibit pictures of the fabric which show the Aurora Borealis effect were taken with a flash, I constantly have to check if the color is right by using the same method (flash-photographing it, that is).
Fabric that was photographed with a flash will always look quite a bit different from fabric that was taken without a flash; so if you need to match flash-photographed fabric colors, always check the color by, well, flash photographing it.
If you compare my 'right side' flash photo with the smaller picture of the original dress (which I photoshopped right between the two daylight and flash photos of my own fabric), you can see that I'm almost there in achieving that 'streaked', aurora borealis effect - I'll need to add some more green streaks (which will turn turquoise on the blue fabric). Click to enlarge:
I will now wet the fabric again, then add more green paint and after the fabric has dried, again, check if the effect on my fabric looks correct. But I think I'm definitely getting closer.
Oh, and I also ordered photosensitive stamp plates to make my own stamps for the symbols on the overdress.
I really tried to carve them (as stamps as well as as stencils...); but they're too delicate so I'll take the photosensitive stamp making route ;-) _________________ ~*~ Love of my life: Creating costumes! ~*~
Amidala Red Invasion
After a lot more painting and making a pattern, my skirt now looks like this:
I still need to add a waistband (and lining of course).
I also received my photosensitive stamp plates. Since I need sunlight to actually make the stamps, I have so far postponed that part because, well, bad weather for *weeks*. Here's hope this will change soon. _________________ ~*~ Love of my life: Creating costumes! ~*~
Amidala Red Invasion
As for the symbols on the dress, my initial plan was to make stamps (using photosensitive stamp material), and then print them to my fabric. However, that didn't work out because while the finished stamps work very well on paper, they are unable to absorb enough paint to stamp fabric properly.
So what I did was to buy a stencil burner (for airbrush stencils), sheets of Mylar (which is used for those stencils), use the template which I had already created for the stamps...
...burn the stencils out...
...and made a test print (on a scrap of fabric that I had left over from my Senate gown) to verify that the stencils work.
Note that this is really just a test, I tested various colors and thicknesses of paint - the paint that was too thin ran beneath the stencil and looks 'smeared' on this test scrap on the smaller symbol on the right side - but now I know which paint thickness to use for the actual printing.
This is what the overdress looked like when I had finished stamping the symbols:
Just because the intense sparkle of the costume doesn't photograph well, I also recorded a short video. Please excuse my shaky hands. They're always like that as the nerves in my hands are damaged, which is why 'hand sewing' and 'hand embroideries`just like 'recording videos' are particularly difficult for me.
I was pretty horrified when I discovered (by comparing the photo of my dress to the original dress) that my dress pattern is wrong insofar as that the 'side' panels of the dress have to be shortened by 'one symbol' in order to exactly copy the look of the original dress.
It's not a difficult change to make - I just need to hem the sides one symbol "higher" than they are now - but I was SO sure that I had counted the symbols properly when making the pattern. Oh well. _________________ ~*~ Love of my life: Creating costumes! ~*~
Amidala Red Invasion
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You can post calendar events in this forum