Forum and Costume Controls

   FAQFAQ  SearchSearch  MemberlistMemberlist   UsergroupsUsergroups  medals.php?sid=0a3b5523537c7c6d409317a4ba328225Medals   RegisterRegister   ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in

       
REMINDER: Do not change your e-mail address yourself. Please read this first for why.

[New Standard VOTE] Shaak Ti The Clone Wars

 
Post new topic   Reply to topic    Rebel Legion Forum Index -> Costume and Prop Making -> Jedi -> KJO Standards Development -> KJO Standards Archive
View previous topic :: View next topic  

Does the Detachment Approve the Following Standard?
Yes
55%
 55%  [ 11 ]
No
45%
 45%  [ 9 ]
Users Voted : 20
Total Votes : 20
This poll has expired.

Author Message
AhsokaFreakingTano (Kelly Hawthorne)
Detachment XO
Detachment XO


Joined: 14 Oct 2015
Posts: 430
Location: Utah
Medals: None

PostPosted: Wed Jun 19, 2019 5:31 pm    Post subject: [New Standard VOTE] Shaak Ti The Clone Wars Reply with quote

Link to Discussion: http://www.forum.rebellegion.com/forum/viewtopic.php?t=105646

Image Gallery: http://www.kjo.rebellegion.com/?portfolio=shaak-ti-tcw
Headpiece
Made from latex or latex-like material to give the appearance of skin.
Headpiece must be free of wrinkles or bumps and have an overall smooth appearance.
The front Montrals have a defined indent from the middle front piece and curve up at the top towards the tips of the montrals matching references
Image URL: http://www.kjo.rebellegion.com/wp-content/uploads/2014/08/3.jpg
The middle front piece has a defined indent from the lower Front lekku and Montral section.
Image URL: http://www.kjo.rebellegion.com/wp-content/uploads/2014/08/163-680x484.jpg
In the back of the headpiece, the Montrals have a defined indent from the rear lekku.
The rear lekku comprises of two (2) pieces with defined indents to separate them
Image URL: http://www.kjo.rebellegion.com/wp-content/uploads/2014/08/183-680x612.jpg
Rear Lekku overall shape must match references
The overall length of the lekku on both front and back should be proportional to the wearer and reach at least to the crotch of the wearer in the front and below the buttocks in the back.
Headpiece should be painted with color and striped matching references with all lines being solid and having no blurring or gradients between them.
Optional: a two or three-toned paint scheme on the blue to add depth and improve accuracy.
Headpiece Jewelry: Image URL: http://www.kjo.rebellegion.com/wp-content/uploads/2014/08/2.jpg
http://www.kjo.rebellegion.com/wp-content/uploads/2014/08/044-680x638.jpg
Akul Teeth: There are a total of eleven (11) teeth in a gold/bronze color, five (5) on each side with one (1) in the center, the teeth on the side gradually increase in size and have a gentle upwards curve towards the top center of the headpiece.
Teeth must sit flush against the headpiece and have no gapping.
Center head pendant:
Head pendant is a circle comprised of a shallow curved with a smaller center dome-shaped piece. The centerpiece is a lighter gold/bronze color than the overall piece
The centerpiece has four (4) total smaller shallow dome pieces around it, two (2) on each side. The bottom of those two being slightly smaller than the top.
At the top of the centerpiece, a flat piece of jewelry connects the centerpiece to the Akul teeth and spans the full length of the Center tooth, and to the half-way point of the tooth on either side
Optional: there is fine detailing on the center pendant’s larger portion that can be added for greater accuracy.
Image URL: http://www.kjo.rebellegion.com/wp-content/uploads/2014/08/27-680x455.jpg
Face Beads: Image URL: http://www.kjo.rebellegion.com/wp-content/uploads/2014/08/27-680x455.jpg


From the center pendant, there is a small strand of two (2) larger beads with two (2) smaller ones in between them.
From the last smaller bead there are two (2) more of the domed pieces like the ones on either side of the center pendant, with a smaller one on top.
After the two dome pieces, the bead pendants split off into two (2) strands that comprise of the same beads from the original top strand. The first section of the strand is two (2) large beads and one (1) small one, then there is a larger round bead followed by the lower segment.
The lower segment is made of the same beads as the other strands and has a total of three (3) larger beads and two (2) smaller ones, the strand ends with the larger round bead that divided the segment.
The Overall color of all the beads is a gold/bronze color and has a matte metallic look.
The Jewelry mainly rests on the wearer's forehead with the beaded pieces ending just past the brow line where the eye sockets start.

Top headpiece and back beads:
Over the top of the headpiece between the montrals are two (2) strands of beads, in the same repeating pattern as the front face beads, that pattern is smaller beads, larger ones, and the large round one to break up the segments.
These strands start at the top of the center Akul tooth with the two large round beads and continue until the back of the headpiece.
Image URL: http://www.kjo.rebellegion.com/wp-content/uploads/2014/08/2.jpg
At the back of the headpiece, the two strands of beads come together at the top of another Akul tooth like the one on the front center of the headpiece
Image URL: http://www.kjo.rebellegion.com/wp-content/uploads/2014/08/183-680x612.jpg
There are three (3) total of those same teeth that make a larger triangle
Teeth sit flush against the headpiece.
Image URL: http://www.kjo.rebellegion.com/wp-content/uploads/2014/08/173.jpg
Where the two (2) teeth on the bottom of this triangle come together there is a single long bead in a gradual teardrop shape

Makeup
Image URL: http://www.kjo.rebellegion.com/wp-content/uploads/2014/08/163-680x484.jpg
http://www.kjo.rebellegion.com/wp-content/uploads/2014/08/044-680x638.jpg
Makeup must have an overall even appearance
Natural eyebrows must be covered
The main skintone is a red-orange color
Face markings are made up of two large white ovals following the shape of the wearer's face the white covers the full portion of the wearer’s eyes
On the forehead on slightly off from center, there are two (2), one (1) per side, small trapezoid shapes in the same red-orange as the rest of the skin matching references.
White portions extend down to the top of the wearer’s cheekbones.
Lips are either a white or light grey in color

Underuit
Image URL: http://www.kjo.rebellegion.com/wp-content/uploads/2014/08/ep301concept06-680x467.jpg
Dark brown in color, /skin tight garment
Undersuit can either be a full bodysuit or just the top as the leg portion is not seen and is covered by the skirt.
The top is made up of close fitting, skin tight, shirt with straps approximately 1-1.5in wide and a squared neckline matching references.
Neckline covers the bust.

Skirt
The Skirt is made from Matte (not shiny) brick colored fabric.
The skirt is pleated all the way around with accordion or knife pleats or gathered, must not be flat and match references.
Image URL: http://www.kjo.rebellegion.com/wp-content/uploads/2014/08/Untitled_edi.jpg
Overall length should be enough that the skirt touches the ground when standing.
The overall shape is an A-line with a slight flare towards the bottom of the skirt.
Shoes/boots must not be visible while the wearer is standing.

Robe
Image URL: http://www.nexusroute.co.uk/wp-content/uploads/2013/03/ep301concept06.jpg
The Robe is made from a medium to heavy weight matte brown material
The cloak is open and does not close, the opening is wide enough to show the full tabard.
The hemline of the robe is curved, the curve starting where the front tabard ends and being longer in the back ends just above the skirt’s hem.
The sleeves of the robe are close fitting but not skin tight at the top, and have a gradual flare into a bell sleeve
The sleeve ends just past the wearer's wrist when the arms are by the wearer’s side.
The hood of the robe starts at the front of the robe in the mid armhole and rests over the wearer’s biceps and shoulders
In the back, the hood is wide and has an even curve all the way across.
There are two (2) pleates that come in towards the ceneter back of the wearer on the hood.
This part of the hood rests under the larger, wider portion, and should follow the overall shape of the rear lekku.

Scarf:
The Scarf is a wide waffle textured fabric in a mustard or yellow-brown color closely matching references.
The scarf is approximately 3-4in wide
The scarf lays under the robe but should be visible fully towards the bottom.
Scarf ends above the end of the tabard, the hem coinciding with the start point of the last repeated tabard pattern.
Image URL: https://lumiere-a.akamaihd.net/v1/images/open-uri20150608-27674-1bmn7ki_b84741ea.jpeg?region=0,0,1280,785

Tabard and Belt
Belt:
Made of leather or leather-like material and fits close to the wearer.
The main part of the belt is a brown in a close shade to the robe.
In the center front of the belt, there is a rectangular buckle that is curved to better fit to the wearer
Color of the buckle is a lighter brown color
On the left side of the belt, a covertech clip is present.
Tabbard:
Made of leather or leather-like material
The pattern that matches reference can be carved, etched, or embossed into the material. The pattern cannot be painted there must be a depth to the pattern.
The overall shape of the tabard is wider at the bottom and smaller at the top and the width increase is gradual.
The pattern of the tabard repeats four and a half times with each repeat of the pattern getting larger from top to bottom in order to compensate for the width increase. The ‘half’ repeat of the pattern is at the top of the tabard
Tabbard should be painted or dyed the various tans, reds, browns, etc to match the references.

Arm Sleeves and Gauntlets
Arm sleeves:
The arm sleeves do not attach to the tank top and are made from the same material as the Undersuit.
The arm sleeves start just below the wearer’s bicep and continue ending at the wrist.
Gauntlets: Image URL: https://lumiere-a.akamaihd.net/v1/images/open-uri20150608-27674-1bmn7ki_b84741ea.jpeg?region=0,0,1280,785
Leather or Leather-like material
The pattern that matches reference can be carved, etched, or embossed into the material. The pattern cannot be painted there must be a depth to the pattern.
Gauntlets are either dyed or painted in the colors coordinating to the reference in their various shades of browns, tans, reds, etc.
Gauntlets fit flush against the wearer's forearm and can’t have any visible seams, a seam with a closure on the underside of the gauntlet is allowed.

Boots
Image URL: http://www.nexusroute.co.uk/wp-content/uploads/2013/03/ep301concept06.jpg
Black combat or engineer style boots that end just below the knee
According to the official Reference, boots can have laces, and lace studs.

Lightsaber (Optional)
A character lightsaber is required that matches the references, toys are not allowed
If bladed the blade is blue.
Hilt only is acceptable


Last edited by AhsokaFreakingTano (Kelly Hawthorne) on Mon Jul 01, 2019 8:04 pm; edited 3 times in total
Back to top
View user's profile Send private message
Oraculo (Agustin)
Legion Council
Legion Council


Joined: 15 Apr 2013
Posts: 8563
Location: Buenos Aires - Argentina
Medals: 4 (View more...)
Gold Star (Amount: 4)

PostPosted: Wed Jun 19, 2019 5:42 pm    Post subject: Reply with quote

Voted

Yours!
_________________
Legion Administrative Council (LAC) Member 2020
Detachment CO - KJO 2014 - 2020
Charter Amendment Committee 2017-2020
�Legion Costume Judge 2016 - 2020
BCO Cruz del Sur Base 2016 - 18
BPRO Cruz del Sur Base 2016 - 17
Award: Rebel of the Year 2015
TCO Templo Pucar� 2015-16
Detachment XO - KJO 2014-15
RO Cruz del Sur Base 2013 -14
Back to top
View user's profile Send private message Send e-mail
ChrisHimself (cloitre christophe)
Assistant Captain of the Guard
Assistant Captain of the Guard


Joined: 10 Aug 2016
Posts: 348
Location: france
Medals: 1 (View more...)
Rebelthon2020 (Amount: 1)

PostPosted: Wed Jun 19, 2019 8:18 pm    Post subject: Reply with quote

Voted Very Happy
_________________
Back to top
View user's profile Send private message Send e-mail Visit poster's website AIM Address
Oraculo (Agustin)
Legion Council
Legion Council


Joined: 15 Apr 2013
Posts: 8563
Location: Buenos Aires - Argentina
Medals: 4 (View more...)
Gold Star (Amount: 4)

PostPosted: Sun Jul 07, 2019 3:31 am    Post subject: Reply with quote

Thank you so much Kelly for this amazing job!

I passed this Standard to the Costume Standards Review forum for the Final Review

http://www.forum.rebellegion.com/forum/viewforum.php?f=1002

Yours!
_________________
Legion Administrative Council (LAC) Member 2020
Detachment CO - KJO 2014 - 2020
Charter Amendment Committee 2017-2020
�Legion Costume Judge 2016 - 2020
BCO Cruz del Sur Base 2016 - 18
BPRO Cruz del Sur Base 2016 - 17
Award: Rebel of the Year 2015
TCO Templo Pucar� 2015-16
Detachment XO - KJO 2014-15
RO Cruz del Sur Base 2013 -14
Back to top
View user's profile Send private message Send e-mail
Display posts from previous:   
Post new topic   Reply to topic    Rebel Legion Forum Index -> Costume and Prop Making -> Jedi -> KJO Standards Development -> KJO Standards Archive All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can post calendar events in this forum
The Rebel Legion is a worldwide Star Wars costuming organization comprised of and operated by Star Wars fans. While not sponsored by Lucasfilm Ltd., it is Lucasfilm's preferred volunteer Rebel costuming group. Star Wars, its characters, costumes, and all associated items are the intellectual property of Lucasfilm. © 2021 Lucasfilm Ltd. & ™ All rights reserved. Used under authorization.


Powered by phpBB © 2001, 2005 phpBB Group