*SPOILER* TLJ Luke - Crait - Mock Standard - Write Up

Kylo Ren (Dawn Bright)

Luke Skywalker “The Last Jedi”

Hair and Face

-The face is worn and aged.
-The hair is a light to medium brown shag “Alexander the great” style.
-Full beard is darker in color from the head hair and is well trimmed.

Under Tunic

-White Linen or raw silk.
-Front closure crosses over chest.
-2 inch collar around neck and descends behind front closure leaving a large gap in center front.
or
-2 inch collar around neck that ends at the front closure.
-Long sleeved ends at wrist with cuff that ends approximately 6 inches above the wrist.
-tight lines made from same color fabric adorn the collar and cuff.

Tunic

-Made of black Linen or Raw Silk
-Sleeves end just above the trench coat sleeves.
-Hood is double lined and ends at front closure.
-Front closure claps at the top of the hood an continues to the bottom of the hem.
-Tunic is mid thigh length.

Belt

-Belt is approximately 2.5 inches wide with two .5 inch distressed borders.
-Belt is dark brown in color and has no other ornaments or embellishments aside from the octagonal buckle.
-The buckle is distressed and is aluminum colored.

Trenchcoat

-Trench coat is made from a black fabric
-Features horizontal ornamental lines on the jacket
-The lines on the sleeves are vertical and the sleeves end between the wrist and the elbow.
-The jacket is ankle length.
-There is a cut at the back of the jacket that ends at the lower back

Pants

-Pants are a dark grey or black in color.
-The pants are void of detailing.

Boots and Legwraps

-Legwraps are a chocolate brown and begin at the ankle and end just above the knee.
The boots are brown in color.

Optional

Lightsaber

-If lightsaber is hung it features a triangular clip and is attached to the wearers front right side.
-The lightsaber is graflex “Anakin” style blue.

PLEASE NOTE:
-2 inch collar around neck and descends behind front closure leaving a large gap in center front.
or
-2 inch collar around neck that ends at the front closure.

The costume changes depending upon scene. In some there is a collar and in others its dropped down into the shirt. However its always popped open

How I believe the image above is accomplished

_________________

LMO 501st Legion ALMO Rebel Legion

Kylo Ren (Dawn Bright) · Posted: Sat Dec 23, 2017 4:06 am Post subject:

BREAK DOWNS - DESIGNS - DETAILS - REF

Ive got a ton more images but they are not very clear

Clear gap in front collar

Back showing hood

Back - showing no interesting details or elements

The saber clip ONLY appears on the belt WHILE the saber is attached. It is triangular shaped

Now note in this image where the saber has been removed. No clip! Movie magic!

Construction

Two piece hood, ironed.

Closeup of linen

Tunic front

arm cuff

clip
_________________

LMO 501st Legion ALMO Rebel Legion

Kylo Ren (Dawn Bright) · Posted: Sat Dec 23, 2017 4:11 am Post subject:

"Ive failed you Ben... and for that I'm sorry."

"Oh you're sorry!"

"Ill always be with you, just like your father."

"See ya around kid"
_________________

LMO 501st Legion ALMO Rebel Legion

feltonbass (Steven Barbarich) · Joined: 18 Dec 2017 Posts: 6 Medals: None

Hot diggity! Thank you for this.

I know what Im doing next week.

feltonbass (Steven Barbarich) · Joined: 18 Dec 2017 Posts: 6 Medals: None

So, here's a question.

I'm doing these robes without question, but Id like to mix it with my SaberForge Prodigal Son saber.

With the RotJ style saber, will there be a problem getting Legion Approval?

jcrab3t () · Posted: Sat Dec 23, 2017 8:26 pm Post subject:

The saber will have to be the one in ESB (Anakins - Luke’s - Rey’s). Either ultrasabers, or a hero fix replica.

Face characters are very specific.
_________________

feltonbass (Steven Barbarich) · Joined: 18 Dec 2017 Posts: 6 Medals: None

I wonder if these would work as standard Jedi.

Probably not. Right out of the gate sleeve length seems to be an issue.

jcrab3t () · Posted: Sat Dec 23, 2017 9:19 pm Post subject:

...and thanks again, Dawn, for all your great work and attention to detail. I can’t wait to get this one started!
_________________

Volund Starfire (Jason Ellenburg) · Posted: Sun Dec 24, 2017 12:23 am Post subject:

jcrab3t () · Posted: Sun Dec 24, 2017 4:44 am Post subject:

Any of those would’ve okay (as long as it resembles his blue saber).
_________________

Kylo Ren (Dawn Bright) · Posted: Sun Dec 24, 2017 5:17 am Post subject:

SmilingFox (Matthew Jackson) · Posted: Mon Dec 25, 2017 3:23 am Post subject:

This is excellent work. What brand of boots are those?
_________________
People sleep peaceably at night only because rough men stand willing to do violence on their behalf.

Volund Starfire (Jason Ellenburg) · Posted: Mon Dec 25, 2017 4:35 am Post subject:

Oel Darkrider (Leonardo S. Furlani) · Posted: Tue Dec 26, 2017 4:03 pm Post subject:

I'm looking forward to start this costume...
_________________
TXO - KJO - Templo Pucarï¿½ 2013-13
BPRO Cruz del Sur Base 2013-14
BXO Cruz del Sur Base 2014-15
BXO Cruz del Sur Base 2016-16
BPRO Cruz del Sur Base 2016-16
SXO - RLSC - Cuntur Squadron 2015-16
SCO - RLSC - Cuntur Squadron 2016-17-18-19-20

Lora Skywalker () · Posted: Tue Dec 26, 2017 8:55 pm Post subject:

Either of Luke's blue sabers should be fine. Smile

_________________
DXO of Royalty & Senatorial detachment

Detachment website: http://www.senate.rebellegion.com/

Forum and Costume Controls