Forum and Costume Controls

   FAQFAQ  SearchSearch  MemberlistMemberlist   UsergroupsUsergroups  medals.php?sid=06f8c017f628be51479c8e116c66bee3Medals   RegisterRegister   ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in

       
REMINDER: Do not change your e-mail address yourself. Please read this first for why.

Tabards & Obi - easy way

 
Post new topic   Reply to topic    Rebel Legion Forum Index -> Costume and Prop Making -> Jedi -> Jedi Tutorials
View previous topic :: View next topic  
Author Message
Leroni (Leroni)
Lothal Base XO
Lothal Base XO


Joined: 23 Feb 2014
Posts: 1245
Location: Lothal Base
Medals: 2 (View more...)
Rebel Legion Supporter (Amount: 1)

PostPosted: Mon Apr 25, 2016 8:31 pm    Post subject: Tabards & Obi - easy way Reply with quote

Hello,
i want to show you an easy way to create your Tabards & Obi. It will fit during the whole trooping day.

the width of tabards:
children 10-15 cm (4" - 6")
woman 15-18 cm (6"-7")
men 18-20 cm (7"-8") (Korrektur)

Take the width of the tabards 2 times and cut /tear the cloth. To tear the cloth makes sure that it will be straight. The lenght is up to you (read the costume standards), i use for woman min. 2 meter (79").
Fold the cloth to the half (long side) and sew it.



Turn the inside out and iron the seam. now you have 3 hose. 2 times for tabards, 1 time for obi. fold the edges inside and sew it.




Now fold the tabards to half and fix a press-button. The other side of the press-button will be fixed at the outer tunic. i always take the female to the outer tunic and the male to the tabards. that makes it possible to mix the outfit.



Now the tarbards would form an X so you need to make a tuck to bring them to Y position. Take 2-3 cm (~8,0"-1") and fold the cloth on the outside of the Tabard. You will see the Y form



Finish the obi with velcro.


And here are your Y Tabards. Fix them together with some stitches in the middle (under the obi) and have fun with your jedi.






http://www.rebellegion.com/jedi-costume-standards-generic/
Quote:
2. Tabards: Must extend at least to or past the bottom hem of the OT on the front. The back tabards may end under the obi or may extend to (or past) the bottom hem of the OT (or may be the same length as the front tabards). This guideline is obviously for the more traditional length OTs. For OTs that are longer (past the knee or to the floor or where a full length skirt is worn), the tabard length would be more variable.

a. Tabard construction should be such that the front tabards do not overlap. This is often accomplished by constructing the tabards in a “Y” formation where any seam joining the tabard below the obi to the tabard above the obi is covered by the obi. Tabards may cross in the back. Tabards may be sewn together in the back.

b. Scarf-style tabards, having an around-the-neck design, are permitted.

c. A single front tabard, centrally located (covering the crotch area) is permitted.

d. The end of the front tabard(s) may have a variable design (square, rounded, triangular, octagonal, etc.)

e. Tabards may have borders and/or varying decorative symbols or other decorations (such as Aurebesh, etc.). The decorations/designs should not obviously be from an Earth-bound period or culture (Renaissance, Celtic, Asian, tribal, etc.)

f. Leather or pleather tabards are permitted.

g. Tabard width should generally be from the seam at the collar of the OT to the edge of the shoulder and be a similar width as the obi. A general width to use would be 5 inches to 6 inches wide (depending on one’s height and build). Common sense should be used in selecting Tabard width, and the width should be proportional to the costumer’s body.

h. Kataginu are not permitted.

3. Obi (Sash): The obi wraps around the waist, and should be approximately three times the width of the belt and/or of a similar width as the tabards.

a. Obi closures (Velcro, snaps, etc.) should not be visible.

b. Leather or pleather Obi are permitted.

c. Obi may have borders.

_________________
KJO Detachment XO 2016/2017
LCJ Support Staff 2016/2017
KJO Detachment Merchandise Officer 2015/2016
Wretched Hive Detachment Merchandise Officer 2014/2015
Twilek - Saga



Last edited by Leroni (Leroni) on Mon Jul 25, 2016 7:22 pm; edited 2 times in total
Back to top
View user's profile Send private message Send e-mail Visit poster's website
dannv ()
Legion Costume Judge
Legion Costume Judge


Joined: 08 Oct 2013
Posts: 1883
Location: Reno, NV
Medals: 1 (View more...)
Celebration Anaheim (Amount: 1)

PostPosted: Wed Apr 27, 2016 12:37 am    Post subject: Reply with quote

I'd say the tabbard widths are too wide. They should not extend past the edge of the shoulder tuck. 6 to 7 inches for a male is usually plenty (my latest are 7 inches and I have relatively wide shoulders.) Tabbards and obi should be of similar width and 6 inches is usually good for the obi.

Last edited by dannv () on Sun Mar 05, 2017 3:30 am; edited 1 time in total
Back to top
View user's profile Send private message
Milla Sayven ()
Active Legion Member


Joined: 04 Jan 2017
Posts: 72
Location: Kanan Dume, CA
Medals: None

PostPosted: Mon Jan 09, 2017 8:10 pm    Post subject: Reply with quote

Do you put anything inside the tube to hold the shape?
_________________
#CarrieOn

Have you ever danced with the krayt dragon in the pale moonlight?

First comes the day Then comes the night. After the darkness Shines through the light. The difference, they say, Is only made right By the resolving of gray Through refined Jedi sight. —Journal of the Whills
Back to top
View user's profile Send private message Visit poster's website
Leroni (Leroni)
Lothal Base XO
Lothal Base XO


Joined: 23 Feb 2014
Posts: 1245
Location: Lothal Base
Medals: 2 (View more...)
Celebration Europe 3 (Amount: 1)

PostPosted: Mon Jan 09, 2017 8:17 pm    Post subject: Reply with quote

Milla Sayven wrote:
Do you put anything inside the tube to hold the shape?


Hello Milla,
no i dont put anything inside.
i use cotton and linen. these materials (double layer) are strong enough to look fine. if you use thin material you can fill it. i have a material for this case i can iron to the fabric.

yours
Leroni
_________________
KJO Detachment XO 2016/2017
LCJ Support Staff 2016/2017
KJO Detachment Merchandise Officer 2015/2016
Wretched Hive Detachment Merchandise Officer 2014/2015
Twilek - Saga

Back to top
View user's profile Send private message Send e-mail Visit poster's website
trinlea ()



Joined: 03 Feb 2017
Posts: 3
Location: Harrisburg PA
Medals: None

PostPosted: Fri Mar 03, 2017 2:10 am    Post subject: Reply with quote

This is EXACTLY how I was going to construct my tabards, and also plan on showing a friend the same way!
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Rebel Legion Forum Index -> Costume and Prop Making -> Jedi -> Jedi Tutorials All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can post calendar events in this forum
The Rebel Legion is a worldwide Star Wars costuming organization comprised of and operated by Star Wars fans. While not sponsored by Lucasfilm Ltd., it is Lucasfilm's preferred volunteer Rebel costuming group. Star Wars, its characters, costumes, and all associated items are the intellectual property of Lucasfilm. © 2017 Lucasfilm Ltd. & ™ All rights reserved. Used under authorization.


Powered by phpBB © 2001, 2005 phpBB Group