Quingald Finn's lightsaber build

[Ki-Djowac ()]

Hi Rebels,

This build started with one of our very own RLB members Quingald Finn who machined his own lightsaber. After some advice on electronics and inner diameter, the final specs were decided.

Specs :
- Green LED similar as in Green Knight
- FoC with Pex (= the blade will flicker a white clash with blaster and clash effects)
- Green ring illuminated anti-vandal switch
- PC 2.0 pcb
- removable batteries : 2X Ultrafire TR14500 1200mAh 3,7V = 7,4V 1200mAh
- Ultrafire WF-139 Rapid charger
- Adegan Dual Core soundfont by Lordblako : available @ http://saberfont.com/saberFonts.shtml
- tri-rebel GGW
- 2W JQ high quality speaker
- Force Relics 'The Core' V1 blade plug
- Force Relics removable battery solution compatible with a slightly redesigned MHS cone
- Force Relics MHS PC 2.0 Cradle
- Force Relics single tactile MHS switch ring
- Force Relics alu kill key

Quingald Finn machined his lightsaber with MHS inner diameters and a workable length inside. This gave an opportunity to come up with something new : a removable battery pack solution. His blade holder is also compatible with the TCSS heatsink for an easy main LED install. The PC 2.0 cradle sits very deep inside the hilt, but with a pair of extra long tweezers you can access the micro-SD card to change the soundfont if needed.

Custom designed removable battery pack solution :



General wiring :



General use with everything in place :



The Core V1 blade plug :



Final pics :



There you have it
_________________

[Master Vos (Tim)]

Thanks for sharing very nice build
_________________

Ryloth Base Website
Ryloth Base FB Page