A Corellian Jedi WIP

Fyr Mureys () · Posted: Sat Jul 28, 2012 11:06 pm Post subject: A Corellian Jedi WIP

I got two WIPs overlapping and confused, so I'm moving one here for clarity.

We had a bit of trouble tracking down a Simplicity pattern. However, one of the "Padawan's Guide" tutorials (the obi/tabard tutorial had this rough image that we went off.

First we copied the measurements off the guide, making them longer as we're both tall. Here's Foxtom, who will be a blue Healer Jedi, making the patterns.

He's drawing them onto Kimguard, a tough polypropylene cover that we use as wrapping for sterile trays. No good for a costume, but great as a tough reusable pattern.

Below is him modelling the tacked together trial.

And a close up of the shoulder, trialling the tucked in approach suggested by the tutorials. I think this is only required for the outer tunic.

Fyr Mureys () · Posted: Sat Jul 28, 2012 11:10 pm Post subject:

Here's a trial outer tunic made from cotton.

(Moved from "Greetings from Fyr")
_________________
Until our next happy meeting! Wink

Tython Base Facebook Page
Tython Base Membership Officer
Tython Base founding Commanding Officer 2013-2014

Fyr Mureys () · Posted: Sun Jul 29, 2012 12:00 am Post subject:

Here is the Obi pattern from The Padawan's guide.

And here is the Kimguard pattern we made from them. Back view.

We have been very impressed at how the patterns have come together. The thing I love about this obi is that it is traditional and wearable, as in it was what Jedi (and Samurai) were likely to wear, rather than just a rectangle of cloth with velcro for screen magic or a basic costume. Coming from a mediaevalist background, I'm fairly pedantic about these things, and Thomas is Austrian, with a cultural insistence on precision... We have been pulling each other up and refusing to let each other take shortcuts at every step of the way. Rest assured, there will be no Dickies in this costume! Wink

Here is the same back view in cotton.

And a front view.

And here with a twin belt mock-up

Really happy with how it's coming together.

I've gone a long way in researching this costume...
This is in Kathmandu, Nepal...

This is in Kyoto, Japan... Wink

_________________
Until our next happy meeting! Wink

Tython Base Facebook Page
Tython Base Membership Officer
Tython Base founding Commanding Officer 2013-2014

Fyr Mureys () · Posted: Sun Jul 29, 2012 12:13 am Post subject:

The Padawan's Guide patterns are drawn for a 5'5" female, so we've been lengthening the patterns at all stages to accommodate our 6'3" frames. The Tabard design is shown in the first post, this is the first time that we ignored her design and copied a tabard from a costume that Sviw had lent us for reference, that had an even curve along the length rather than the wriggle that the Padawan's guide had included to compensate for... Female chest anatomy. Wink

Front view. (Please ignore T-shirt, Laughing

)

Back view.

This costume will be worn by a combatant Jedi, so the obi overlap will be stitched closed much higher in the final design, so that it stays in place while duelling. No Velcro on the shoulders for us, thanks!
_________________
Until our next happy meeting! Wink

Tython Base Facebook Page
Tython Base Membership Officer
Tython Base founding Commanding Officer 2013-2014

Fyr Mureys () · Posted: Sun Jul 29, 2012 12:37 am Post subject:

We started this build simply as a test piece for making the patterns for our Jedi. We used top quality green cotton for testing simply because we had a lot of it left over from another project. However, in the amount of time and effort that we have put into this costume already, the best test of our work is to carry it through to completion and approval. Reading the colour tutorials, green Jedi are usually Corellians being nationalistic about their planetary culture... Hence;

"A Corellian Jedi" is in progress!

The next stage is the inner tunic. Back to the Padawan's Guides...

This is a good idea, and we have made up kimguard templates for it, but for simplicity sake, we went with the below design.

Here is the completed inner tunic, showing length of sleeve and overlap. We have gone back and taken in the width a bit since this shot.

Below is a closeup showing the cuff and collar detail.

_________________
Until our next happy meeting! Wink

Tython Base Facebook Page
Tython Base Membership Officer
Tython Base founding Commanding Officer 2013-2014

Fyr Mureys () · Posted: Sun Jul 29, 2012 1:06 am Post subject:

Leather work, a favourite old pair of boots;

And a matching black belt with a bit of a mismatch, Old Republic covertec clip and New Republic belt buckle, permittable under the new generic Jedi rules, of course.

If this pouch is acceptable as "In universe"'I will make another to match it for the "two pouches" rule.
_________________
Until our next happy meeting! Wink

Tython Base Facebook Page
Tython Base Membership Officer
Tython Base founding Commanding Officer 2013-2014

EeanLedgor () · Posted: Sun Jul 29, 2012 2:32 am Post subject:

Don't forget about the tutorials here on our own forums. Some have already used the Simplicity patterns and modified them for screen accuracy Wink

Using those would be a lot less work, since a lot of the redesign has already been done.
_________________
Past Offices held within the Rebel Legion: LMO, Asst. LMO, Legion Costume Judge, DCO and DXO KJO, BCO and BXO Tranquility Base
Writer of many costuming tutorials.
Maker of costume props and costumes for Rebel Legion and 501st members.

Mihunai (Jermain Palmen) · Posted: Sun Jul 29, 2012 10:16 am Post subject:

Things are looking great so far!

I do have one tip for that obi though, as I've used
that same pattern.

The diagonals tend to flap over the belt, so
I added some velcro to keep them in place.

Also, you might want to check if those boots are
tall enough.
_________________
mTm

Fyr Mureys () · Posted: Sun Jul 29, 2012 11:06 am Post subject:

Thanks for the tips!

We are pretty far advanced at this stage to significantly change patterns, and on my first look through the tutorials here I hadn't found anything as helpful as the Padawan's guide, and thought that they were the only option short of buying simplicity and modifying them. After you mentioned other tutorials, SithariRog, I had another look and found another... That you may have some biased preference for! Wink

We have already modified the Padawan's guide ones extensively, as we are 6'3 slim males and the PG patterns are apparently designed for a 5'5" buxom lady. We have almost finished the tabards but we shall discuss modifying them based on your design.

Mihunai, a main aim of our costume is to have no Velcro. We have interface stiffening in the main body of the Obi, if you have found that a problem in that area we shall see if we can extend the interface to stiffen that area. Thank you for the warning. Speaking of warnings, how high should the boots be, is there a minimum guideline? They are 13" high, and I was about to order others the same height online with a different shape and brown.

Fyr Mureys () · Posted: Fri Aug 03, 2012 11:10 am Post subject:

We've added in Tabards. We didn't use the Padawan's guide for these ones, as they are designed for female chest anatomy... Instead we used Anakin's leather Tabards from a costume that Swiv lent us for comparison.

Rear view;

And front, showing the layers really coming together well.

As you can see, most of the sewing on this costume is done.

Inner Tunic - Complete
Outer Tunic - 90% (Shoulder tuck is giving us trouble)
Obi - Complete
Tabards - 95%
Robe - 10%
Belt - Pending
Pouches - 50%
Boots - Pending
Food Capsules - Ordered
Covertec Clip - Complete
_________________
Until our next happy meeting! Wink

Tython Base Facebook Page
Tython Base Membership Officer
Tython Base founding Commanding Officer 2013-2014

Magnius () · Posted: Fri Aug 03, 2012 2:05 pm Post subject:

looks good
_________________
Tell my tale to those who ask, tell it truly, the evil deeds along with the good, and let me be judged accordingly.......... the rest is silence

Fyr Mureys () · Posted: Fri Aug 03, 2012 11:58 pm Post subject:

Thank you!
_________________
Until our next happy meeting! Wink

Tython Base Facebook Page
Tython Base Membership Officer
Tython Base founding Commanding Officer 2013-2014

ionicdesign (Michael) · Posted: Sat Aug 04, 2012 12:30 am Post subject:

Always good to have more green. It's coming along nicely. Ben

_________________

KJO Detachment XO/CO 2011-2013 * LCJ * Takodana Base XO * A. Legion Webmaster

Admiral ED · Guest

Nice proyect.... I have in mind for a Corellian Jedi too....
But it will have to wait after Celebration Embarassed

Fyr Mureys () · Posted: Sat Aug 04, 2012 10:29 am Post subject:

Thank you both.

What do you think about the Tabards crossing over at the back? I like that look and it fits the shoulders better.

Fyr
_________________
Until our next happy meeting! Wink

Tython Base Facebook Page
Tython Base Membership Officer
Tython Base founding Commanding Officer 2013-2014

Forum and Costume Controls