About Us Members Unit Listing Events Costuming Resources Forum Contact Us Trading Cards
 

Forum and Costume Controls

   FAQFAQ  SearchSearch  MemberlistMemberlist   UsergroupsUsergroups  medals.php?sid=a45a1724b5dcfa6c6fadf62b2776b1afMedals   RegisterRegister   ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in

       
REMINDER: Do not change your e-mail address yourself. Please read this first for why.

Captain Rex, Clone Trooper Standards

 
Post new topic   This topic is locked: you cannot edit posts or make replies.    Rebel Legion Forum Index -> Costume and Prop Making -> COSTUME STANDARDS
View previous topic :: View next topic  
Author Message
Princess Leia Organa (Lori)
Rebel Legion Reserve


Joined: 22 Oct 2002
Posts: 5968

Medals: 1 (View more...)
Rebel Legion CV Supporter (Amount: 1)

PostPosted: Sat Oct 04, 2008 4:11 pm    Post subject: Captain Rex, Clone Trooper Standards Reply with quote

Captain Rex, Clone Trooper (animated)



Required Items:

  1. Black Undersuit
    >One or two piece black undersuit. Commonly used components include sports compression wear, warm-up suits, dance unitards, or diveskins. Undersuit must be smooth in appearance or with vertical ribbing with no labels or logos visible once the armor is on.
  2. Black Gloves
    >Black over the wrist gloves made of leather, nylon, or other low pile fabrics. Gloves must not show any labels or logos once the armor is on and cover any exposed skin.
  3. Neck Seal
    >Neck seal to be black in color with vertical ribbing or being smooth in appearance. No logos or labels are to be visible. If the seal is not incorporated as part of the undersuit, a balaclava or other similar covering is acceptable.
  4. Helmet
    >The Clone Wars animated style clone helmet - Fanmade helmet.
    >Visor - Black visor covers entire "T" shape and frown
    >Helmet Fin on dome
    >4 black vents on each side of helmet
    >Blue jaig eyes on forehead
    >Blue visor trim and rear detail
    >Yellow "kill stripes", 4 on each side of the forehead
    >Rangefinder (animated style) mounted on right/outside of helmet
    >Smoked/black visor over entire opening on face of helmet
    NOTE: Episode II style helmets are not acceptable
  5. Armor
    (1) Chest
    >Chest and back plate should match together at the sides with no gap, just a seam line.

    (1) Back
    >Chest and back plate should match together at the sides with no gap, just a seam line.

    (2) Shoulders
    >Blue stripes centered on shoulders

    (2) Shoulder Straps
    > Correct shape with ridges.

    (2) Upper Arms
    >Front/back pieces are seamless.
    >Blue stripes on outside of biceps

    (2) Forearms
    >Front/back pieces are seamless
    >Blue stripes on elbows and forearms

    (2) Handplates

    (1) AB plate

    (1) Kidney/Lower Back Piece

    (1) Butt Plate

    (1) Cod piece

    (2) Upper thighs
    > Front/back pieces are seamless.

    (2) Lower Legs
    > Blue stripes centered on knees

    (1) Compad on left forearm


  6. Clone Trooper boots
    >White shoes with white soles
    >Strap across top of foot with circular detail pieces at each end
    >Proper toe detail
    >No laces or logos
  7. Belt
    >The Clone Wars style belt
    >Segmented (or segmented-look) belt
    >One large belt box, opposite each other, on hips
    >Thermal detonator centered on rear of belt
  8. Kama
    >black with blue trim
    >Length should be to the bottom of the thigh armor
    >Split up the back all the way to the belt
    >Spacing in the front should place the edges of the kama at roughly the outside corners of the bottom of the codpiece
  9. Holsters and Pistols
    >One holster on each hip, hanging from the belt
    >2 DC-17 Pistols (see photo reference)
    NOTE: Animated pistols and holsters are larger than the realistic props.
  10. Pauldron (black, grey and blue)
    >Front/center of pauldron meets the intersection of breast details on chest plate
    >Back of pauldron extends to bottom of back plate detail
    >Shoulder plate is no longer than helmet is wide


Optional
Elements listed as acceptable here may not be traditionally associated with a costume, but are not so unreasonable as to detract from it. Please keep in mind that the following items may not be allowed at certain canon/high profile appearances.

  1. DC-15 Short
  2. DC15 Long Rifle
  3. minigun
  4. rocket launcher

    Note:
    Other weapons used by clones in The Clone Wars are acceptable.

  5. Weathering - HIGHLY RECOMMENDED Color should be heavy on the greys, with little/no browns


Reviewed/Revised by Legion Costuming Judge on April 8, 2010
_________________
R/S Original Trilogy LCJ
BH-0937 "Boushh Leia" of Florida Garrison

Back to top
View user's profile Send private message
General Fidelis (Tom T.)
Rebel Legion Reserve


Joined: 18 Mar 2004
Posts: 1008
Location: Erie, PA
Medals: None

PostPosted: Thu Apr 08, 2010 1:23 pm    Post subject: Captain Rex, Clone Trooper (realistic) Reply with quote

Captain Rex, Clone Trooper (realistic)






Required Items:

NOTE: This clone wears Phase I (Episode II) armor with additional paint and accessories. Only additional additonal features are listed here.

  1. Helmet
    >Blue eyes and triangles on forehead
    >Blue visor trim, rear detail, and 2 vertical ribs back of helmet
    >Yellow "kill stripes", 4 on each side of the forehead
    >Rangefinder (Boba/Jango Fett style) mounted on right/outsdie of helmet and painted white
    >Black or charcoal grey frown
    >Smoked/black visor (mirrored acceptable)
    NOTE: Rubies helmet is not acceptable
  2. Armor
    (2) Shoulders
    >Blue stripe down the center

    (2) Upper Arms
    >Blue stripe on the outside of the bicep, located slightly more toward the front

    (2) Elbows
    >Blue stripe centered on elbow plate

    (2) Forearms
    >Rank stripe on upper/outside

    (2) Hand Plates
    >Rank stripes down center

    (2) Knees
    >Blue stripe down center
  3. Pauldron (black, grey, and blue)
    >Similar to Episode III style
    >Shoulder plate is no longer than helmet is wide
    >Mantle plates painted grey
    >Left shoulder plate details painted blue
  4. Kama
    >Black with blue trim
    >Length should be to the bottom of the thigh armor
    >Split up the back all the way to the belt
    >Spacing in the front should place the edges of the kama at roughly the outside corners of the bottom of the codpiece
  5. Pistols and Holsters
    >One holster on each hip, hanging from the belt
    >2 DC-17 Pistols


Optional:

  1. Weathering - HIGHLY RECOMMENDED - Color should be heavy on the greys, with little/no browns
  2. Other clone weapons - Rex is shown with just about all of the accepted Clone weapons at some point in the movie/series
  3. Jango Fett "Arena" style jetpack - Seen when he follows Anakin into battle with the droids The Clone Wars movie
    NOTE: Standard Jango Fett color scheme is NOT acceptable.


Reviewed/Revised by Legion Costuming Judge on Sept. 30, 2010
_________________
Would you like to know more?

Clones of the Republic (COR) Detachment Founder
Former Clone Trooper LCJ
TC-9927
Back to top
View user's profile Send private message Visit poster's website
Display posts from previous:   
Post new topic   This topic is locked: you cannot edit posts or make replies.    Rebel Legion Forum Index -> Costume and Prop Making -> COSTUME STANDARDS All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot post calendar events in this forum
The Rebel Legion is a worldwide Star Wars costuming organization comprised of and operated by Star Wars fans. While not sponsored by Lucasfilm Ltd., it is Lucasfilm's preferred volunteer Rebel costuming group. Star Wars, its characters, costumes, and all associated items are the intellectual property of Lucasfilm. © 2014 Lucasfilm Ltd. & ™ All rights reserved. Used under authorization.


Powered by phpBB © 2001, 2005 phpBB Group