Forum and Costume Controls

   FAQFAQ  SearchSearch  MemberlistMemberlist   UsergroupsUsergroups  medals.php?sid=81da505eb4c706d8610bd78e55da45efMedals   RegisterRegister   ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in

       
REMINDER: Do not change your e-mail address yourself. Please read this first for why.

The Marshall/Cobb Vanth Draft with resources

 
Post new topic   Reply to topic    Rebel Legion Forum Index -> Costume and Prop Making -> Rebel Supporters -> Rebel Supporters Standards Development -> Rebel Supporters New Standard Proposals
View previous topic :: View next topic  
Author Message
awindowacrossall (Jana)
Detachment CO
Detachment CO


Joined: 07 Sep 2016
Posts: 228
Location: Phoenix, AZ, US
Medals: None

PostPosted: Sun Nov 22, 2020 2:08 pm    Post subject: The Marshall/Cobb Vanth Draft with resources Reply with quote

Cobb Vanth/The Marshal Found Parts List

The Cobb Vanth/Marshall Build group on Facebook: https://www.facebook.com/groups/themarshal/

Please note the links are not the only sources of these parts


Belt

Condor Riggers Belt (Tan)

https://tacticalgear.com/condor-riggers-belt-black#/22496/0,1189/1

Gloves

V-TAC HALF FINGER PLASTIC BACK PAINTBALL GLOVES (Tan)

https://www.ansgear.com/Valken_V_Tac_Half_Finger_Plastic_Back_Paintball_Gl_p/valkenvtacgloveshalffingerpltn.htm?gclid=Cj0KCQjwufn8BRCwARIsAKzP694sAfxEHfIN0mJ6ZTfntesMkqrkDzAeBjrAz81QH-4rUlBF_ShnRqEaAhZdEALw_wcB

Pants

Women's Casual Camouflage Multi Pockets Cargo Pants (Color called “58army” on Amazon)

https://www.amazon.com/gp/product/B01JSD7J62/ref=ox_sc_act_title_1?smid=A3CK2LV0DT0OU&th=1&psc=1

Holster Belt Greeblie

MICRO CONNECTORS M.2 2280 SSD Heat Sink Kit Cooling

https://www.amazon.com/gp/product/B07GNHD52H/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

Blaster Rifle

Modified PP-19 Vityaz, airsoft version linked below

https://www.evike.com/products/63269/



Detonator Main Body

MILITARY ALARM DEVICE WATERPROOF NOISE SIGNAL TRAP GERMAN ARMY BUNDESWEHR BW

https://www.ebay.com/itm/MILITARY-ALARM-DEVICE-WATERPROOF-NOISE-SIGNAL-TRAP-GERMAN-ARMY-BUNDESWEHR-BW/173819941372?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649&fbclid=IwAR29Hu89Wy0_FkBcKVnkPrsdIRjDlsLAH_NJL_UmZhTGN-6JpQiksdZOcHA



Detoantor Upper Switch

NKK Switches TL22DCAW015C

https://www.alliedelec.com/product/nkk-switches/tl22dcaw015c/70192199/?fbclid=IwAR3TvjGomC4wwn1QCBaA29isbFLbxRQeqk9rXy32QEoj_YijIkZ3Nu2pW6w
_________________
"The Force... it's calling to you."

Jana Moore

DCO- United Citizens of the Galactic Republic, 2020-2021
DXO- United Citizens of the Galactic Republic, 2019-2020
-Womp Rat 19-
Approved Costumes:
Resistance Rey, Jakku Rey, TFA Pilot


Last edited by awindowacrossall (Jana) on Sun Nov 22, 2020 5:05 pm; edited 1 time in total
Back to top
View user's profile Send private message
3mandos ()
Active Legion Member


Joined: 21 Jan 2020
Posts: 6

Medals: None

PostPosted: Sun Nov 22, 2020 4:05 pm    Post subject: Reply with quote

Yass!!!
_________________
- Brian
Kebii'tra Verd - Jor'alor; Firaxan Clan MMCC
Shinji Vaar - Jedi Knight; Alderaan Base RL

"The Three Mandalorians"
Facebook.com/3mandos
Instagram: @threemandos
Back to top
View user's profile Send private message
TrooperPX (David Ramsay)
Active Legion Member


Joined: 27 May 2011
Posts: 2680
Location: Columbus, OH
Medals: 6 (View more...)
Rebel Legion Supporter (Amount: 1)

PostPosted: Sun Nov 22, 2020 4:27 pm    Post subject: Reply with quote

Working on this now. Cool
_________________
-David

501st: ID, DZ, CT, IS, DZ, IG, TI, IC, IC, TK, TS, SL, SL, TB, DS, TR, BH, TA, ID, TI, DZ, DZ, TX
Rebel: RT, RS, JD, WH, RP, JD, RT, CL, RT, RS, RT, WH, JD, RT, RT
Apollo Base - Columbus, Ohio
Back to top
View user's profile Send private message Send e-mail
Corran Horn (Kyle Miller)
Active Legion Member


Joined: 04 Feb 2004
Posts: 23
Location: The Ford Galaxy (Windsor, Ontario)
Medals: None

PostPosted: Sun Nov 22, 2020 4:46 pm    Post subject: Reply with quote

Yep, this is definitely on my to-do list.
_________________
"It's only stupid if we die doing it, otherwise it's heroic."
Back to top
View user's profile Send private message Send e-mail Visit poster's website
Gregory ()
Active Legion Member


Joined: 11 Jul 2017
Posts: 63

Medals: None

PostPosted: Sun Nov 22, 2020 5:17 pm    Post subject: Reply with quote

I'm also mid-build.

I would argue that this character should be approvable with and without helmet. There's a lot of screen time both ways.

One question is, if blasters are sometimes optional due to varied local laws and convention rules, will it be approvable with an empty holster?
_________________
Gregory Smith
BH14710 ESB Boba Fett, ANH TK in Garrison Titan
TFA Resistance Pilot, Old Man Kenobi, General Dodonna in Alpha Base
Olympia, WA, USA


Last edited by Gregory () on Sun Nov 22, 2020 5:47 pm; edited 1 time in total
Back to top
View user's profile Send private message
awindowacrossall (Jana)
Detachment CO
Detachment CO


Joined: 07 Sep 2016
Posts: 228
Location: Phoenix, AZ, US
Medals: None

PostPosted: Sun Nov 22, 2020 5:39 pm    Post subject: Reply with quote

Gregory wrote:
I'm also mid-build.

I would argue that this character should be approvable with and without helmet. There's a lot of screen time both ways.

One question is, if blasters are sometimes optional due to varied local lawd and convention rules, will it be approvable with an empty holster?


I agree with both of those as he’s seen with and without helmet- it would be similar to Sabine in that respect. And yes blasters usually fall into optional die to local/state/etc. laws- same as Resistance Rey for example, where the blaster is optional.
_________________
"The Force... it's calling to you."

Jana Moore

DCO- United Citizens of the Galactic Republic, 2020-2021
DXO- United Citizens of the Galactic Republic, 2019-2020
-Womp Rat 19-
Approved Costumes:
Resistance Rey, Jakku Rey, TFA Pilot
Back to top
View user's profile Send private message
Sorontar ()
Active Legion Member


Joined: 11 Nov 2014
Posts: 38

Medals: None

PostPosted: Mon Nov 23, 2020 12:28 am    Post subject: Reply with quote

Having an optional blaster also adds to the simplicity of any costume, as some characters use non-common weapons and not everyone wants to spend the time and money to custom-make a weapon. I am designing a costume for Talon Karrde (Fringe smuggler) and I can't match his blasters to any known designs, so I will propose them as optional. However, I will still recommend the holster be part of the core costume.

Sorontar
_________________
Back to top
View user's profile Send private message
lantern2745 (Jeff)
Active Legion Member


Joined: 25 Apr 2015
Posts: 19

Medals: None

PostPosted: Tue Nov 24, 2020 2:10 am    Post subject: Reply with quote

I'm collecting parts for my build as well.
Helmet should be optional since as mentioned, he leaves it off more than not.
I would say the holster (with or without blaster in it) is integral to the costume.
The rifle should be optional as well since blasters aren't always allowed.
Those are my 2 credits. Smile
- Jeff
Back to top
View user's profile Send private message
awindowacrossall (Jana)
Detachment CO
Detachment CO


Joined: 07 Sep 2016
Posts: 228
Location: Phoenix, AZ, US
Medals: None

PostPosted: Wed Dec 30, 2020 2:27 am    Post subject: Reply with quote

Standard Name: Cobb Vant
Primary Detachment: UCGR
Submission Date: (Date standard is submitted to the LMO team
Existing Standard URL: Not Applicable



Front Image
URL:
Source:

Back / Second View Image
URL:
Source:


Character Description
Cobb Vanth, also known as "the Marshal," was a human male who lived during the Galactic Civil War and the subsequent New Republic Era. Once a slave, he rose to become a sheriff of Mos Pelgo on the planet Tatooine

(Source: Wookieepedia - https://starwars.fandom.com/wiki/Cobb_Vanth)


Required Items

Under Shirt
Item Image URL:
Source:

Required Details
-

Optional Details
- None

Pants
Item Image URL:
Source:

Required Details
-Mid-Waist with belt loops, relaxed fit

Multi-pockets design with zipper closure with button, made of cotton twill fabric

Optional Details
- None

Scarf
Item Image URL: https://www.amazon.com/gp/product/B01JSD7J62/ref=ox_sc_act_title_1?smid=A3CK2LV0DT0OU&th=1&psc=1

Source:

Required Details
-
- Two

Optional Details
- None

Belt
Item Image URL:https://tacticalgear.com/condor-riggers-belt-black#/22496/0,1189/1
Source:

Required Details
- Belt is tan and features and is constructed of nylon webbing and features a forged steel buckle. Hook-and-loop tab keeps the belt closed.
- Two

Optional Details
- None
Gloves
Item Image URL: https://www.ansgear.com/Valken_V_Tac_Half_Finger_Plastic_Back_Paintball_Gl_p/valkenvtacgloveshalffingerpltn.htm?gclid=Cj0KCQjwufn8BRCwARIsAKzP694sAfxEHfIN0mJ6ZTfntesMkqrkDzAeBjrAz81QH-4rUlBF_ShnRqEaAhZdEALw_wcB
Source:

Required Details
- The palms are constructed of long-lasting synthetic leather and the backs feature breathable air mesh. Hinged plastic armor guards the hand for unbeatable coverage. The fingers tips are free for total movement and dexterity.
Breathable padded mesh construction on back of the hand
Flexible plastic armor on the main part of hand
Half-finger construction for dexterity
Velcro adjustable elastic wrist closure
- Two

Optional Details
- None

Hair and Make-Up
Item Image URL: https://static.wikia.nocookie.net/starwars/images/6/61/Cobb_Vanth_%28The_Marshal%29.png/revision/latest/scale-to-width-down/1000?cb=20201102114932
Source:

Required Details
- Hair is dirty blonde/grey in color with a beard that is trimmed in to face. Beard is blonde in color
- Two

Optional Details
- None
_________________
"The Force... it's calling to you."

Jana Moore

DCO- United Citizens of the Galactic Republic, 2020-2021
DXO- United Citizens of the Galactic Republic, 2019-2020
-Womp Rat 19-
Approved Costumes:
Resistance Rey, Jakku Rey, TFA Pilot
Back to top
View user's profile Send private message
Dragon_a ()



Joined: 30 Nov 2020
Posts: 1

Medals: None

PostPosted: Fri Jan 01, 2021 1:06 pm    Post subject: Reply with quote

The link under “scarf” is the link for the pants.
Can I also check, I assume the facial and hair details will only be relevant if you choose not to wear the bucket?
Back to top
View user's profile Send private message
awindowacrossall (Jana)
Detachment CO
Detachment CO


Joined: 07 Sep 2016
Posts: 228
Location: Phoenix, AZ, US
Medals: None

PostPosted: Fri Jan 01, 2021 7:45 pm    Post subject: Reply with quote

Dragon_a wrote:
The link under “scarf” is the link for the pants.
Can I also check, I assume the facial and hair details will only be relevant if you choose not to wear the bucket?


Yes- sorry about that. It is the incorrect link. Mind you this is still a WIP standard so any contributions and checks are appreciated. As for the bucketed/armored version, I’m thinking much like other characters that they would be optional accessories.
_________________
"The Force... it's calling to you."

Jana Moore

DCO- United Citizens of the Galactic Republic, 2020-2021
DXO- United Citizens of the Galactic Republic, 2019-2020
-Womp Rat 19-
Approved Costumes:
Resistance Rey, Jakku Rey, TFA Pilot
Back to top
View user's profile Send private message
OrangeCrush (Amber Sotelo)
Legion Council
Legion Council


Joined: 27 May 2015
Posts: 199
Location: Howell, MI
Medals: 2 (View more...)
Gold Star (Amount: 2)

PostPosted: Mon Jan 25, 2021 4:29 am    Post subject: Reply with quote

I have some amazing reference photos of Cobb Vanth to share- what would be the best way to do that?
Back to top
View user's profile Send private message
Don Coon ()



Joined: 30 Jan 2021
Posts: 2

Medals: None

PostPosted: Sun Jan 31, 2021 8:12 pm    Post subject: Cobb Vanth Costume Standards Draft - Don Coon Reply with quote

I took an extensive stab at costume standards that I hope will help:

Standard Name: Cobb Vanth
Primary Detachment: UCGR
Submission Date: (Date standard is submitted to the LMO team)
Existing Standard URL: Not Applicable


CHARACTER DESCRIPTION

Cobb Vanth, also known as "the Marshal," was a human male who lived during the Galactic Civil War and subsequent New Republic Era. Once a slave, he rose to become a sheriff of Mos Pelgo on the planet Tatooine. He despised the Red Key Raiders, a syndicate attempting to establish itself on the planet. Immediately following the Battle of Endor, Vanth fled into the desert following Mos Pelgo's takeover by the Mining Collective, he encountered some Jawas and traded a camtono of silicax oxalate crystals for a set of Mandalorian armor.

Vanth led and defended the Mos Pelgo including battling Tusken Raiders who raided their village multiple times. At one point, the Mandalorian bounty hunter Din Djarin came to town searching for a fellow Mandalorian. Vanth agreed to give Djarin his armor in exchange for helping him kill a krayt dragon that lived nearby. Vanth and Djarin allied themselves with a local group of Tusken Raiders as well as the people of Mos Pelgo and succeeded in defeating the beast, after which Vanth gave Djarin the armor and parted ways with him.

(Source: Wookiepedia)

REQUIRED ITEMS

Bandana
Worn around the neck, ties in back
Deep red in color
Linen material, thick enough to have folds, but not minor wrinkles
Some weathering and fraying of edges per reference.
Worn with or without armor. Not used if going for flashback escape/desert wandering.

Shirt
Swiss Dot or distressed "Frontier Dot" or "Dobby Dot" style fabric with dots proportionate to reference photos. Dot fabric must be a light to medium tight weave with a brushed or "pre-washed" soft worn look. No thick fabrics, dot brocades, etc.
Long sleeved oversized fitting shirt with a standing collar approximately 1.5" tall. Top edges are rounded. Closed, the shirt is similar to a standing collar of the late 1800s - old western Floyd "side-button” shirt with a vertical cut on the outer flap. The outer flap when opened has a dark lining. There are no visible fastenings. Loose fitting in sleeves, tucked in front, slight blousing in back.

Sleeves are billowed and knife-pleated into an elongated cuff that extends roughly three quarters of the way to the elbow, or the length of the gauntlets. Fasteners are hidden unless you can find them in the reference.

Gloves
Matrix brand - Half-finger tactical gloves (for airsoft) - Tan
Also sold under Valken Paintball V-Tac brand name.
(Note: Their “Tan” is a somewhat greenish tan.)
Weathering includes dark discoloration and some minor fraying per reference.
Three sizes of the Matrix brand are available at these links:
XS/S
https://www.evike.com/products/43474/
MD/LG
https://www.evike.com/products/43472/
L/XL
https://www.evike.com/products/43473/

Gloves are only worn when Cobb Vanth uses armor, no gloves are in scenes without armor

Belt & Accessories
Condor - Rigger Belt - Tan - This belt has specific buckles and webbing and is 1.75” wide. Remove logoed labeling.
The belt closes on the blaster side not as normally intended. The main part of the belt passes through the buckle, pulling the buckle locking bar to the right and covering it as it passes across to attach with velcro. The belt does NOT go back through the buckle on the other side of the locking bar.
At the left side of the triangular metal part, where the triangle narrows, there is an added black ratchet strap. This is used to hold the detonator later in the episode.

Holster & Accessories
Holster belt is 1.5” wide and should be or look like leather, reddish brown per reference images.
The holster belt is slung very low on the right side, under the rear right pants pocket flap.
The holster itself is the same color leather material. It wraps from the buckle around the left hip (non-blaster side) and comes around the right hip back to the front.
Standing reference shows 3 visible belt holes on the non-blaster side of the buckle. Flying reference shows 3 visible belt holes on the blaster side, front pouch is not visible. Therefore, holster belt may be adjusted as needed.
Front pouch - same color as the holster belt, approximately one finger width away from the buckle toward the blaster side. Brass chamfered Chicago screw closure. The middle third of flap is somewhat straight cut with the outer thirds being 45 degree angles, rounded corners (not sharp, exacting cuts). In reference, front pouch itself is level despite the low slung angle of the belt.
Rear pouch - same size and style as the front pouch, Located to the right of rear left pocket, left of center overall. Rear pouch is aligned with the belt angle.
Micro Connectors - M.2 2280 SDD Heat Sink Kit - the top face of the anodized aluminum part must be sanded to the bare aluminum surface. The heat sink is placed on the right side of the holster belt, approximately half its own length away from the holster.
Chamfered brass Chicago screws with NO flat head slot - same brass color as the pouch snap. See reference for height off belt. One set of two screws, one above the other, are equidistant between the rear pouch and the heat sink part. A second set are the same distance on the opposite side of the rear pouch. The flying standee reference shows another brass part next to the holster buckle under the extra belt length - could be the make end of a snap or another brass piece, likely another set of two screws.
Holster belt has an aluminum part on the left hip - flat, square base with chamfered corners and four rivet points. A cylinder rises up from that base with a smaller cylinder rising up from that.
Belt buckle is white with raised red stripes signifying a Marshal badge. The overall buckle shape is like a rounded rectangle with the long and short edges also bowing outward. The raised stripes taper in relief near the edges of the buckle. Weathered scratches in the red areas are to be white to match the majority of the buckle per reference. Approximate proportions of red stripes vs white, using one of the thin vertical red stripes as 1 unit of measure for width:
2w / 1r / 1.75w / 3r / 1.75w / 1r / 2w
The buckle itself is approximately 8 widths of the thin stripe turned horizontally high.

Pants & Accessories
Men’s Tactical Multi-Pocket Cargo Pants - Green - sold under multiple brand names such as Free Knight. Distinctive features include uniquely shaped rear pocket flaps, unique side pockets with straps and a metal ring.
Weathering on the left hip and patches have been added to the front left pocket and both rear pockets, roughly sewn as if patched over the years. Front pocket is mottled in appearance, no discernible pattern, looks loosely paint-weathered with no distinct hard color contrasts.
Left leg pocket includes a single closure leather-like pouch, dusty black, possibly used to hide the existing zipper pockets (no zippers in a Galaxy Far, Far Away). Also included is a data tag, generally a rectangle, with details on different levels. Dirty white to very light gray with a red button and dark gray inset rectangle with small repeated hole pattern.
Right upper pocket has a mesh part added to hold three aluminum cylinders. The weathering includes blue paint on the mesh. This made them look like they could be salt shakers, but the flying standee reference reveals a solid base. The solid aluminum base is also seen on the center cylinder on the front view standee art.

Spats
Spats are brown leather in appearance with four straps to secure a spat to each leg. The leather from the upper leg is used the full length of the spat. The spats get more sandy and dusty the closer they get to the foot. The top of each spat in ringed with black piping. There is a top ring around each spat under that, ending with stitching. The main body of each spat has vertical stitching that runs from the top ring almost down to the foot cover, curving in toward the center and back up the spat. The same shape on the opposite side of the leg. The foot cover hides the laces and related structure, but still shows the top of the boot. Each of the four straps also has stitching along the top and bottom edges, hook and loop closure. Brown color is darker than the boot material, yet the boot and spats are similarly colored due to sand coloring.
Spats height is below the knee per reference. When standing, right leg armor can overlap the top of spat. When flying, the spat may slide down to allow space for free floating armor between the knee and the spat.

Boots
Tan work or combat boots, tan in color, dark sole, weathered with scuffs and scrapes, dusty in appearance. If you can find boots that have an exact matching sole pattern and profile to the reference, congratulations, you super footwear sleuth!

Hair/Facial Hair
Salt and pepper gray, short on the sides, longer on top. Some style variation from scene to scene. Sometimes worn back with a loose center part, sometimes more to the side with essentially no part. Sometimes slightly off-center loose part. Never a hard line part. Facial hair is salt and pepper gray, longer on upper lip and chin, shorter and lighter elsewhere. Slight part in center of moustache area. Natural edges - not a cleanly groomed edge.

Flak Vest
Boba Fett ROTJ-style flak vest - See Disney Gallery; The Mandalorian Season 2 for behind the scenes footage with flak vest on without armor for proper seams and sew pattern. Back shows zipper closure, exposed harness and velcro patches for jetpack.

Helmet
Boba Fett - similar to ROTJ with extensive paint pitting and wear per reference.
Consensus is the helmet was molded from Sideshow/Legacy Boba Fett life-size bust helmet.
Weathering and pitting per reference.
“Diagnostic port” borden connector is painted the same green as the lower cheek - not weathered silver like other Boba Fett helmet versions. (Sideshow bust borden was not silver, either. Instead, maybe we can just say the metal reacted with Sarlacc stomach acid and oxidized Wink )
S2 E1 Cobb Vanth - No LED lights appear on the rangefinder both times Cobb Vanth uses it. The rangefinder drops and raises without touching the helmet.
OPTIONAL: Servo to control rangefinder.
S2 E6 Boba Fett, technically in the same helmet, touches the helmet ear to drop the range finder and the two red LEDs light up. Bottom LED stays on, top LED blinks.
OPTIONAL: Red blinking LEDs

Armor
Similar to ROTJ Armor with extensive paint pitting and wear per show reference.
Chest, shoulder and back armor is mainly green, but really extensive wear and pitting down to silver. Decal on upper right chest plate (when wearing) is weathered to match show reference. Center diamond between chest plates is the same color as the armor and has a rectangular piece of plastic, painted silver, inserted in the middle as shown in film era visual references.
Gauntlets are very specifically shaped and red with extensive pitting per show reference. Tubing (3) from right gauntlet is exposed, leading up under rear of right shoulder.
Shoulder armor plates matching show reference - yellow/orange with extensive pitting and weathering down to silver. Mythosaur icon is on left shoulder and weathered per reference.
Right knee armor matching show reference - yellow/orange with weathering and pitting.
Inner section forms an upside down "F" pattern as shown in reference images.
Knees are golden yellow and weathered with orange and silver.
Knee Armor appears to attach via a ¾ - 1" dirty white elastic strap, around the back of the knees and weathered according to film era visual references.
The right knee has 1 cylindrical dart launcher on the outside (bottom position) and a tapered metal detail in the top position. These details match film era visual references.
The bottom dart on the right knee has a black ring facing front and matches film era visual references.
There is no left knee armor.

Jetpack
Boba Fett ROTJ-style jetpack with welded patch as seen in the show and replaced missile with shorter, new look. Extensive weathering and pitting per reference.

Blaster Pistol
Based on a German WWI Model 1894 Hebel Flare Pistol with hammer and breach opening lever removed. Front half of blaster is custom. Grips should look like wood.

Blaster Rifle
Bulk of blaster rifle is based on PP-19-01 Vityaz airsoft replica. Middle section of scope from a Singlepoint scope and camshaft segment from Revell Visible V8 Engine Model (Thanks to The Parts of Star Wars - www.facebook.com/PartsofSW - for identification).
Pistol grip and barrel have a tan fabric wrap per reference.

Detonator
Original part is a Honeywell M42G Remote Alarm
Germany Army - Bundeswehr
Honeywell ELAC M42G
NSN: 6665-12-187-5525
Light and sound signal.
Shockproof, waterproof and dustproof
External power supply 14.3V
Weight: 500g.
Military production from Germany.

Alterations required: remove bottom switch, fill hole. Add red toggle switch in top hole. Fill in “Bund” logo, grind off icons, remove top two rings, add two thin plates on either side of the center light - see reference for shape. Side plates - 2 rectangular plates with ridges that don’t stick out any farther than the central lip of the unit. Positioned away from the new switch per reference. Hero prop has 12 main ridges, the space in between New top handle per reference shape using the original holes from the removed rings. Add two switch guard rails with rounded 90 degree angles and a nut at each of the attachment points. Parallel to the unit, on either side of the new switch.
Discrepancies:
In close up in Cobb’s hands, the metal rails are black. The unit Cobb hands to Mando has bare aluminum rails. In Mando’s hand for the final detonation, the rails are black again.
In the hero close up in Cobb’s hands, the switch is down, “button” light is on. The unit Cobb hands to Mando, the switch is up, light is off. In Mando’s hand for final detonation, the switch is up, light is on.
Switch is made to be an illuminated switch, hard to tell if it was wired to illuminate.
Ridged add-on parts on either side: In the hero close up in Cobb;s hands, there are 12 ridges on either side. In Mando’s hand for the final detonation, there are 14 ridges.

New top switch:
NKK Switches TL22DCAW015C
Mfr. Part #: TL22DCAW015C
Allied Stock #: 70192199
Description:
Toggle Switch, DPDT, .689" Flatted Red Toggle, Red 2VDC LED, 6A, 125VAC, Solder
Original part two leads have inverted triangles painted onto the rubber covers. White inverted triangle on right side, green inverted triangle on the left.
Painted black and weathered. Back panel is also black.
_________________
Don Coon
Back to top
View user's profile Send private message
Don Coon ()



Joined: 30 Jan 2021
Posts: 2

Medals: None

PostPosted: Thu Feb 04, 2021 8:11 am    Post subject: Cobb Vanth Proposed Standards Draft - UPDATE Reply with quote

#4 Belt section updated to include the 5-part bandolier.
Original document includes outline-style numbers and bullet points for more clarity. Posting in the forum strips those out.
Full draft below with addition:


Standard Name: Cobb Vanth
Primary Detachment: UCGR
Submission Date: (Date standard is submitted to the LMO team)
Existing Standard URL: Not Applicable


CHARACTER DESCRIPTION

Cobb Vanth, also known as "the Marshal," was a human male who lived during the Galactic Civil War and subsequent New Republic Era. Once a slave, he rose to become a sheriff of Mos Pelgo on the planet Tatooine. He despised the Red Key Raiders, a syndicate attempting to establish itself on the planet. Immediately following the Battle of Endor, Vanth fled into the desert following Mos Pelgo's takeover by the Mining Collective, he encountered some Jawas and traded a camtono of silicax oxalate crystals for a set of Mandalorian armor.

Vanth led and defended the Mos Pelgo including battling Tusken Raiders who raided their village multiple times. At one point, the Mandalorian bounty hunter Din Djarin came to town searching for a fellow Mandalorian. Vanth agreed to give Djarin his armor in exchange for helping him kill a krayt dragon that lived nearby. Vanth and Djarin allied themselves with a local group of Tusken Raiders as well as the people of Mos Pelgo and succeeded in defeating the beast, after which Vanth gave Djarin the armor and parted ways with him.

(Source: Wookiepedia)

REQUIRED ITEMS

Bandana
Worn around the neck, ties in back
Deep red in color
Linen material, thick enough to have folds, but not minor wrinkles
Some weathering and fraying of edges per reference.
Worn with or without armor. Not used if going for flashback escape/desert wandering.

Shirt
Swiss Dot or distressed "Frontier Dot" or "Dobby Dot" style fabric with dots proportionate to reference photos. Dot fabric must be a light to medium tight weave with a brushed or "pre-washed" soft worn look. No thick fabrics, dot brocades, etc.
Long sleeved oversized fitting shirt with a standing collar approximately 1.5" tall. Top edges are rounded. Closed, the shirt is similar to a standing collar of the late 1800s - old western Floyd "side-button” shirt with a vertical cut on the outer flap. The outer flap when opened has a dark lining. There are no visible fastenings. Loose fitting in sleeves, tucked in front, slight blousing in back.

Sleeves are billowed and knife-pleated into an elongated cuff that extends roughly three quarters of the way to the elbow, or the length of the gauntlets. Fasteners are hidden unless you can find them in the reference.

Gloves
Matrix brand - Half-finger tactical gloves (for airsoft) - Tan
Also sold under Valken Paintball V-Tac brand name.
(Note: Their “Tan” is a somewhat greenish tan.)
Weathering includes dark discoloration and some minor fraying per reference.
Three sizes of the Matrix brand are available at these links:
XS/S
https://www.evike.com/products/43474/
MD/LG
https://www.evike.com/products/43472/
L/XL
https://www.evike.com/products/43473/

Gloves are only worn when Cobb Vanth uses armor, no gloves are in scenes without armor

Belt & Accessories
Condor - Rigger Belt - Tan - This belt has specific buckles and webbing and is 1.75” wide. Remove logoed labeling.
The belt closes on the blaster side not as normally intended. The main part of the belt passes through the buckle, pulling the buckle locking bar to the right and covering it as it passes across to attach with velcro. The belt does NOT go back through the buckle on the other side of the locking bar.
At the left side of the triangular metal part, where the triangle narrows, there is an added black ratchet strap. This is used to hold the detonator later in the episode.
On the right rear of the belt when worn, there are 5 vertical thin cylindrical objects that appear aluminum. They have some varying detail. The consensus is to use Central Pneumatic Pocket Blow Gun from Harbor Freight (aluminum finish version is available in-store and is inexpensive) barring any future higher resolution reference to the contrary. They are attached to the belt in a fabric bandolier-style per reference.

Holster & Accessories
Holster belt is 1.5” wide and should be or look like leather, reddish brown per reference images.
The holster belt is slung very low on the right side, under the rear right pants pocket flap.
The holster itself is the same color leather material. It wraps from the buckle around the left hip (non-blaster side) and comes around the right hip back to the front.
Standing reference shows 3 visible belt holes on the non-blaster side of the buckle. Flying reference shows 3 visible belt holes on the blaster side, front pouch is not visible. Therefore, holster belt may be adjusted as needed.
Front pouch - same color as the holster belt, approximately one finger width away from the buckle toward the blaster side. Brass chamfered Chicago screw closure. The middle third of flap is somewhat straight cut with the outer thirds being 45 degree angles, rounded corners (not sharp, exacting cuts). In reference, front pouch itself is level despite the low slung angle of the belt.
Rear pouch - same size and style as the front pouch, Located to the right of rear left pocket, left of center overall. Rear pouch is aligned with the belt angle.
Micro Connectors - M.2 2280 SDD Heat Sink Kit - the top face of the anodized aluminum part must be sanded to the bare aluminum surface. The heat sink is placed on the right side of the holster belt, approximately half its own length away from the holster.
Chamfered brass Chicago screws with NO flat head slot - same brass color as the pouch snap. See reference for height off belt. One set of two screws, one above the other, are equidistant between the rear pouch and the heat sink part. A second set are the same distance on the opposite side of the rear pouch. The flying standee reference shows another brass part next to the holster buckle under the extra belt length - could be the make end of a snap or another brass piece, likely another set of two screws.
Holster belt has an aluminum part on the left hip - flat, square base with chamfered corners and four rivet points. A cylinder rises up from that base with a smaller cylinder rising up from that.
Belt buckle is white with raised red stripes signifying a Marshal badge. The overall buckle shape is like a rounded rectangle with the long and short edges also bowing outward. The raised stripes taper in relief near the edges of the buckle. Weathered scratches in the red areas are to be white to match the majority of the buckle per reference. Approximate proportions of red stripes vs white, using one of the thin vertical red stripes as 1 unit of measure for width:
2w / 1r / 1.75w / 3r / 1.75w / 1r / 2w
The buckle itself is approximately 8 widths of the thin stripe turned horizontally high.

Pants & Accessories
Men’s Tactical Multi-Pocket Cargo Pants - Green - sold under multiple brand names such as Free Knight. Distinctive features include uniquely shaped rear pocket flaps, unique side pockets with straps and a metal ring.
Weathering on the left hip and patches have been added to the front left pocket and both rear pockets, roughly sewn as if patched over the years. Front pocket is mottled in appearance, no discernible pattern, looks loosely paint-weathered with no distinct hard color contrasts.
Left leg pocket includes a single closure leather-like pouch, dusty black, possibly used to hide the existing zipper pockets (no zippers in a Galaxy Far, Far Away). Also included is a data tag, generally a rectangle, with details on different levels. Dirty white to very light gray with a red button and dark gray inset rectangle with small repeated hole pattern.
Right upper pocket has a mesh part added to hold three aluminum cylinders. The weathering includes blue paint on the mesh. This made them look like they could be salt shakers, but the flying standee reference reveals a solid base. The solid aluminum base is also seen on the center cylinder on the front view standee art.

Spats
Spats are brown leather in appearance with four straps to secure a spat to each leg. The leather from the upper leg is used the full length of the spat. The spats get more sandy and dusty the closer they get to the foot. The top of each spat in ringed with black piping. There is a top ring around each spat under that, ending with stitching. The main body of each spat has vertical stitching that runs from the top ring almost down to the foot cover, curving in toward the center and back up the spat. The same shape on the opposite side of the leg. The foot cover hides the laces and related structure, but still shows the top of the boot. Each of the four straps also has stitching along the top and bottom edges, hook and loop closure. Brown color is darker than the boot material, yet the boot and spats are similarly colored due to sand coloring.
Spats height is below the knee per reference. When standing, right leg armor can overlap the top of spat. When flying, the spat may slide down to allow space for free floating armor between the knee and the spat.

Boots
Tan work or combat boots, tan in color, dark sole, weathered with scuffs and scrapes, dusty in appearance. If you can find boots that have an exact matching sole pattern and profile to the reference, congratulations, you super footwear sleuth!

Hair/Facial Hair
Salt and pepper gray, short on the sides, longer on top. Some style variation from scene to scene. Sometimes worn back with a loose center part, sometimes more to the side with essentially no part. Sometimes slightly off-center loose part. Never a hard line part. Facial hair is salt and pepper gray, longer on upper lip and chin, shorter and lighter elsewhere. Slight part in center of moustache area. Natural edges - not a cleanly groomed edge.

Flak Vest
Boba Fett ROTJ-style flak vest - See Disney Gallery; The Mandalorian Season 2 for behind the scenes footage with flak vest on without armor for proper seams and sew pattern. Back shows zipper closure, exposed harness and velcro patches for jetpack.

Helmet
Boba Fett - similar to ROTJ with extensive paint pitting and wear per reference.
Consensus is the helmet was molded from Sideshow/Legacy Boba Fett life-size bust helmet.
Weathering and pitting per reference.
“Diagnostic port” borden connector is painted the same green as the lower cheek - not weathered silver like other Boba Fett helmet versions. (Sideshow bust borden was not silver, either. Instead, maybe we can just say the metal reacted with Sarlacc stomach acid and oxidized Wink )
S2 E1 Cobb Vanth - No LED lights appear on the rangefinder both times Cobb Vanth uses it. The rangefinder drops and raises without touching the helmet.
OPTIONAL: Servo to control rangefinder.
S2 E6 Boba Fett, technically in the same helmet, touches the helmet ear to drop the range finder and the two red LEDs light up. Bottom LED stays on, top LED blinks.
OPTIONAL: Red blinking LEDs

Armor
Similar to ROTJ Armor with extensive paint pitting and wear per show reference.
Chest, shoulder and back armor is mainly green, but really extensive wear and pitting down to silver. Decal on upper right chest plate (when wearing) is weathered to match show reference. Center diamond between chest plates is the same color as the armor and has a rectangular piece of plastic, painted silver, inserted in the middle as shown in film era visual references.
Gauntlets are very specifically shaped and red with extensive pitting per show reference. Tubing (3) from right gauntlet is exposed, leading up under rear of right shoulder.
Shoulder armor plates matching show reference - yellow/orange with extensive pitting and weathering down to silver. Mythosaur icon is on left shoulder and weathered per reference.
Right knee armor matching show reference - yellow/orange with weathering and pitting.
Inner section forms an upside down "F" pattern as shown in reference images.
Knees are golden yellow and weathered with orange and silver.
Knee Armor appears to attach via a ¾ - 1" dirty white elastic strap, around the back of the knees and weathered according to film era visual references.
The right knee has 1 cylindrical dart launcher on the outside (bottom position) and a tapered metal detail in the top position. These details match film era visual references.
The bottom dart on the right knee has a black ring facing front and matches film era visual references.
There is no left knee armor.

Jetpack
Boba Fett ROTJ-style jetpack with welded patch as seen in the show and replaced missile with shorter, new look. Extensive weathering and pitting per reference.

Blaster Pistol
Based on a German WWI Model 1894 Hebel Flare Pistol with hammer and breach opening lever removed. Front half of blaster is custom. Grips should look like wood.

Blaster Rifle
Bulk of blaster rifle is based on PP-19-01 Vityaz airsoft replica. Middle section of scope from a Singlepoint scope and camshaft segment from Revell Visible V8 Engine Model (Thanks to The Parts of Star Wars - www.facebook.com/PartsofSW - for identification).
Pistol grip and barrel have a tan fabric wrap per reference.

Detonator
Original part is a Honeywell M42G Remote Alarm
Germany Army - Bundeswehr
Honeywell ELAC M42G
NSN: 6665-12-187-5525
Light and sound signal.
Shockproof, waterproof and dustproof
External power supply 14.3V
Weight: 500g.
Military production from Germany.

Alterations required: remove bottom switch, fill hole. Add red toggle switch in top hole. Fill in “Bund” logo, grind off icons, remove top two rings, add two thin plates on either side of the center light - see reference for shape. Side plates - 2 rectangular plates with ridges that don’t stick out any farther than the central lip of the unit. Positioned away from the new switch per reference. Hero prop has 12 main ridges, the space in between New top handle per reference shape using the original holes from the removed rings. Add two switch guard rails with rounded 90 degree angles and a nut at each of the attachment points. Parallel to the unit, on either side of the new switch.
Discrepancies:
In close up in Cobb’s hands, the metal rails are black. The unit Cobb hands to Mando has bare aluminum rails. In Mando’s hand for the final detonation, the rails are black again.
In the hero close up in Cobb’s hands, the switch is down, “button” light is on. The unit Cobb hands to Mando, the switch is up, light is off. In Mando’s hand for final detonation, the switch is up, light is on.
Switch is made to be an illuminated switch, hard to tell if it was wired to illuminate.
Ridged add-on parts on either side: In the hero close up in Cobb;s hands, there are 12 ridges on either side. In Mando’s hand for the final detonation, there are 14 ridges.

New top switch:
NKK Switches TL22DCAW015C
Mfr. Part #: TL22DCAW015C
Allied Stock #: 70192199
Description:
Toggle Switch, DPDT, .689" Flatted Red Toggle, Red 2VDC LED, 6A, 125VAC, Solder
Original part two leads have inverted triangles painted onto the rubber covers. White inverted triangle on right side, green inverted triangle on the left.
Painted black and weathered. Back panel is also black.
_________________
Don Coon
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Rebel Legion Forum Index -> Costume and Prop Making -> Rebel Supporters -> Rebel Supporters Standards Development -> Rebel Supporters New Standard Proposals All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot post calendar events in this forum
The Rebel Legion is a worldwide Star Wars costuming organization comprised of and operated by Star Wars fans. While not sponsored by Lucasfilm Ltd., it is Lucasfilm's preferred volunteer Rebel costuming group. Star Wars, its characters, costumes, and all associated items are the intellectual property of Lucasfilm. © 2021 Lucasfilm Ltd. & ™ All rights reserved. Used under authorization.


Powered by phpBB © 2001, 2005 phpBB Group