Forum and Costume Controls

   FAQFAQ  SearchSearch  MemberlistMemberlist   UsergroupsUsergroups  medals.php?sid=3427fb02e8a96b326f8c6cef83ad6c7cMedals   RegisterRegister   ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in

       
REMINDER: Do not change your e-mail address yourself. Please read this first for why.

Clone Trooper Soldier, The Clone Wars (animated style)

 
Post new topic   Reply to topic    Rebel Legion Forum Index -> Costume and Prop Making -> Clones of the Republic -> COR Standards Development -> COR Standard Revision Proposals
View previous topic :: View next topic  
Author Message
tarragon (Philip)
Active Legion Member


Joined: 01 Nov 2008
Posts: 77
Location: Wellington, New Zealand
Medals: None

PostPosted: Tue Mar 10, 2020 1:41 am    Post subject: Clone Trooper Soldier, The Clone Wars (animated style) Reply with quote

Standard Name: Clone Trooper Soldier. The Clone Wars Season 1-3 (animated style)
Primary Detachment: Clones of the Republic
Submission Date:
Existing Standard URL:
Front Image:
URL:


Helmet
https://www.cap-that.com/starwars/clone-wars/105/images/clone-wars1x05_0022.jpg
https://www.cap-that.com/starwars/clone-wars/105/images/clone-wars1x05_0359.jpg
Phase I animated style helmet.
Helmet is painted matte or satin white.
Helmet fin, centered on top of dome.
Black eye lens extends down through the entire frown area.
Raised bump at each ear, 1" - 1.25" in diameter.
(4) Vents on each side of helmet.
Vents may be painted black or grey, or cut out and filled with black mesh.
Primer grey stripe around back of dome.
Raised white circle at the back center of the helmet.
Rectangular indent at the back center of the helmet may be primer grey or heavily weathered white.
Armor is weathered with shades of grey.


Neck Seal
Phase I animated style Neck Seal.
Neck seal is black in color with no ribbing.
No logos or labels are visible.
If the seal is not incorporated as part of the under suit, a balaclava or other similar covering is acceptable.

OPTIONAL: Neck seal closes in the front via (2) small black snaps.


Under Suit
Phase I animated style Under Suit.
Black non-textured material, either one-piece or two-piece construction with no visible zippers or logos.


Shoulder Armor
https://www.cap-that.com/starwars/clone-wars/105/images/clone-wars1x05_0059.jpg
Phase I animated style Shoulder Armor.
Armor is painted matte or satin white.
Shoulders are padded so as not to rest flat against the arms.
The top of the bell sits 3/4" - 1" above the natural shoulder.
Armor is weathered with shades of grey.


Upper Arm Armor
https://www.cap-that.com/starwars/clone-wars/105/images/clone-wars1x05_0049.jpg
Phase I animated style Upper Arm Armor.
Armor is painted matte or satin white.
Armor has a notch on the lower area of the back of the arm that matches up with the elbow armor.
Armor is seamless.
No visible traces of how the armor was assembled are shown.
Armor is weathered with shades of grey.


Forearm Armor
https://www.cap-that.com/starwars/clone-wars/105/images/clone-wars1x05_0073.jpg
Phase I animated style Forearm Armor.
Animated Phase I Forearm Armor.
Armor is painted matte or satin white.
Left forearm has a compad with (4) main square recessed areas and (1) slightly smaller square recessed area.
The smaller recess is closest to the elbow.
Armor is seamless on the outside edge.
Due to the shape of the armor, a butted seam is acceptable on the inside if required.
Elbow plate is integrated into the forearm, extending up to fit into the notch on the bicep.
Armor is weathered with shades of grey.

OPTIONAL: Armor is seamless. No visible traces of how the armor was assembled are shown.


Hand Plates
https://www.cap-that.com/starwars/clone-wars/105/images/clone-wars1x05_0061.jpg
Phase I animated style Hand Plates.
Armor is painted matte or satin white.
Hand plates are mirror images of each other.
Hand plates have an angled peak that comes to a point over the index or middle finger, just past the main knuckle of the hand.
Armor is weathered with shades of grey.


Gloves
https://www.cap-that.com/starwars/clone-wars/105/images/clone-wars1x05_0092.jpg
Phase I animated style Gloves.
Black over the wrist gloves made of leather, nylon, or other low pile fabrics.
Gloves cover any exposed skin.
Gloves do not show any labels or logos when the armor is worn.


Chest Armor
https://www.cap-that.com/starwars/clone-wars/105/images/clone-wars1x05_0072.jpg
Phase I animated style Chest Armor.
Armor is painted matte or satin white.
Lower portion of the chest has a curved notch for the abdomen armor to fit into.
Chest and Back Armor match together at the sides and shoulders with no open gap.
A seam line is present.
Shoulder straps are placed over the chest and back armor at the seams.
Armor is weathered with shades of grey.


Back Armor
https://www.cap-that.com/starwars/clone-wars/105/images/clone-wars1x05_0576.jpg
Phase I animated style Back Armor.
Armor is painted matte or satin white.
Rear center of back armor has detailed area that contains a O11 pattern.
Shoulder straps are placed over the Back and Chest armor at the seams.
Armor is weathered with shades of grey.


Abdomen Armor
https://www.cap-that.com/starwars/clone-wars/105/images/clone-wars1x05_0106.jpg
Phase I animated style Abdomen Armor.
Armor is painted matte or satin white.
Top edge of the armor is curved to match the chest.
Abdomen armor protrudes out in the middle to match the shape of the chest.
(4) inset lines divide the abdomen armor into segments.
Abdomen and Kidney armor connect at the sides with no open gap.
A butted seam between abdomen and kidney armor is acceptable.
Armor is weathered with shades of grey.


Kidney Armor
https://www.cap-that.com/starwars/clone-wars/105/images/clone-wars1x05_0236.jpg
Phase I animated style Kidney Armor.
Armor is painted matte or satin white.
Kidney and abdomen armor connect at the sides with no open gap.
A butted seam between the kidney and abdomen armor is acceptable.
Armor is weathered with shades of grey.


Codpiece and Belt front
https://www.cap-that.com/starwars/clone-wars/105/images/clone-wars1x05_0341.jpg
Phase I animated style Codpiece and Belt front.
Armor is painted matte or satin white.
Belt is approx 3" tall and divided into 1.75" wide segments.
The front segments have a key/slot detail.
Belt boxes are mounted at the hips.
Codpiece and Posterior armor connect at the hips.
Butted seams are permitted at this connection if required.
Armor is weathered with shades of grey.


Posterior Armor, Belt rear and Detonator
https://www.cap-that.com/starwars/clone-wars/105/images/clone-wars1x05_0578.jpg
Phase I animated style Posterior Armor, Belt rear and Detonator.
Armor is painted matte or satin white.
Belt is approx 3" tall and divided into 1.75" wide segments.
Posterior armor and Codpiece connect at the hips.
Butted seams are permitted at this connection if required.
Detonator is centered on the back of belt.
Detonator has no control buttons.
The detonator has (2) lines set in approx 1/2" - 5/8" from the edges.
Lines may be recessed or painted on.
Armor is weathered with shades of grey.

OPTIONAL: Detonator lines are recessed.


Belt Boxes
https://www.cap-that.com/starwars/clone-wars/105/images/clone-wars1x05_0301.jpg
Phase I animated style Belt Boxes.
Two rectangular boxes with one mounted on each side of belt.
Boxes are painted matte or satin white.
The top side of the box is tapered outward.
There is an inset detail near the top of each box.
Armor is weathered with shades of grey.


Thigh Armor
https://www.cap-that.com/starwars/clone-wars/105/images/clone-wars1x05_0129.jpg
Phase I animated style Thigh Armor.
Armor is painted matte or satin white.
Front of thigh armor has a flat triangular area near the knee with a notch cut out for the knee armor.
From the top of the triangle a ridge line travels up the front of the thigh to the top edge.
The upper outer edge has an angled section.
Armor is weathered with shades of grey.

OPTIONAL: Armor is seamless.
No visible traces of how the armor was assembled are shown.


Lower Leg Armor
https://www.cap-that.com/starwars/clone-wars/105/images/clone-wars1x05_0129.jpg
Phase I animated style Lower Leg Armor.
Armor is painted matte or satin white.
Knee armor is integrated with the lower leg.
The armor has a flat center triangle below the knee plate, with the single point facing downward.
The calf detail of the armor has a ridge wrapping around the back of the leg.
Due to the shape of the armor, a butted seam is permitted on the inside or back of the leg.
Armor is weathered with shades of grey.


Boots
https://www.cap-that.com/starwars/clone-wars/105/images/clone-wars1x05_0362.jpg
Phase I animated style Boots.
White, ankle high or tall enough to cover the ankle and eliminate any black undersuit visible at the ankle area.
Boots are lace-less and have flat soles.
Boots have a center strip running from the toe to the ankle.
A strap across the top of the foot, and 2 flat white discs on either side of the foot, terminating the strap.

OPTIONAL: Boots have accurate notched sole.



Optional Accessories

DC-15S Blaster Carbine (animated style)
https://www.cap-that.com/starwars/clone-wars/105/images/clone-wars1x05_1208.jpg
Manufactured by BlasTech Industries, this weapon is commonly carried by the Troopers of the Galactic Republic.
This is the animated variant of the DC-15S blaster rifle.


DC-15A Blaster Rifle (animated style)
https://www.cap-that.com/starwars/clone-wars/105/images/clone-wars1x05_1238.jpg
Manufactured by BlasTech Industries, this blaster is the standard issue weapon carried by the Clone Troopers of the Grand Army of the Republic.
This is the animated variant of the DC-15A blaster rifle.


Z-6 Rotary Blaster Cannon (Minigun)
https://www.cap-that.com/starwars/clone-wars/105/images/clone-wars1x05_1220.jpg
Manufactured by Merr-Sonn Munitions, Inc, the Z-6 Cannon incorporates a rotary assembly of six barrels, wrapped around a coolant-lined core, providing a tremendous sustained rate of fire. Because it is large and can become unwieldy, the Z-6 is reserved for special-issue deployment and requires training to use effectively.
Back to top
View user's profile Send private message Visit poster's website
Display posts from previous:   
Post new topic   Reply to topic    Rebel Legion Forum Index -> Costume and Prop Making -> Clones of the Republic -> COR Standards Development -> COR Standard Revision Proposals All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot post calendar events in this forum
The Rebel Legion is a worldwide Star Wars costuming organization comprised of and operated by Star Wars fans. While not sponsored by Lucasfilm Ltd., it is Lucasfilm's preferred volunteer Rebel costuming group. Star Wars, its characters, costumes, and all associated items are the intellectual property of Lucasfilm. © 2020 Lucasfilm Ltd. & ™ All rights reserved. Used under authorization.


Powered by phpBB © 2001, 2005 phpBB Group