Show us your HELMET !!!!

Merc_with_a_Bryar (Sam Falco) · Posted: Fri Nov 17, 2017 10:15 am Post subject:

Figured I'd throw my helmet into the ring as well. This is an original design I did, incorporating my own, darker version of the Star Phoenix Rebellion/Resistance logo, turned into a Nerf skull. It represents the "Inglourious Nerfherders", a group of guerrilla fighters that target First Order forces as brutal revenge for their atrocities.

The Aurebesh on either side of the mohawk reads: "Inglourious" and "Nerfherder" respectively.

Front:

Right Hand Side:

On the right hand side of the helmet, it simply says: "Resist"

Left Hand Side:

The left hand side of the helmet reads: "Bucket Buster", referencing a hatred for Stormtroopers.

I may tweak a few things here and there, maybe add a few more designs to the top of the mohawk, or on the back, etc, but I'm very happy with how it came out. Hope you all like it.
_________________
"I'm no Jedi. Just a guy with a Lightsaber, and a few questions." -Kyle Katarn

Member:
Ra Kura Base (Florida)
Stormfront Temple
Rebel Legion Knights of the Jedi Order
Galactic Stategic Command

Wingspan (Mark Wolf) · Posted: Sun Nov 19, 2017 2:55 am Post subject:

Here is my lid:

_________________
R2-D2 Builder. Rebel Legion, 501st Legion

choinierx (Thomas Choiniere) · Posted: Tue Dec 19, 2017 2:29 am Post subject:

Here's my third Darth Hair build. Did this one based on General Merrick from R1. It's going to be a Christmas gift for my brother.

JediXXL (Gil Guemes) · Posted: Thu Jan 11, 2018 12:57 pm Post subject:

_________________
There is NO Orange Mafia

shadowzeak (Andrew Broadbent) · Posted: Tue Feb 06, 2018 12:10 am Post subject:

I'm finally getting around to finishing my DarthHair helmet and wanted to check that the design I'm looking at is approve-able. I want to have a couple of decals made of my family's Coat of Arms to put on the front on either side of the mohawk. I took a scan of a sketch my sister did, and a friend of mine was able to pass it on to his cousin, who photoshoped the Aurebesh in and digitized it.

Here's the original:

And here's the digitized version with Aurebesh lettering.

I know logos are supposed to avoid looking "Earth-y" so, I wanted to check and see if this would be okay. If so, does anyone know where I'd be able to have some custom decals made?
_________________
Are you kidding me? I'm blind!

Foxxwoof () · Posted: Tue Mar 27, 2018 3:43 pm Post subject:

Just finished my first build. I think I went a tad heavy on the weathering, but I'm very happy with how it turned out overall.

Punisha (Tim Allen) · Posted: Tue Mar 27, 2018 4:54 pm Post subject:

_________________
Tim Allen
Freedom Base CO 2019-2020

wampadude () · Posted: Fri Apr 06, 2018 4:52 pm Post subject:

here is my mock up of my wampa themed helmet, helmet is ready for paint and starting this weekend. finished helmet coming soon

_________________

VivAdama () · Posted: Fri Jun 08, 2018 11:30 am Post subject:

Here's mine!

_________________
Future Rebel soldier!

A New Hopeful () · Posted: Thu Aug 16, 2018 2:52 am Post subject:

My Red 5:

(from Tokyo Disneyland)

_________________
I’m all about that base. ’Bout that base. Yo Rebels.

Costumes: Luke Skywalker (X-Wing Pilot) | Luke Skywalker (Lars Homestead/Tatooine)

A New Hopeful () · Posted: Thu Aug 16, 2018 3:02 am Post subject: Just Kidding

Just kidding. Here’s my real one.

(Apologies for yet another Luke Red 5.)

Awesome build and original paint & decals by DarthHair.

Lightened red paint, weathering & damage plus foldaway swappable mics by me.

Ear pads by ImperialBoots.

Female USB ports epoxied in on either side:

Old Apple USB cable inserted:

Two Motorola swiveling mic headsets
cos I couldn’t find any Racal Minilite ones!

Not that you ever would, but you could:

Apple cables away!
Both mics folded away up into the bucket for when not inside an X-Wing or Speeder:

_________________
I’m all about that base. ’Bout that base. Yo Rebels.

Costumes: Luke Skywalker (X-Wing Pilot) | Luke Skywalker (Lars Homestead/Tatooine)

Blackthorpe () · Posted: Mon Nov 12, 2018 2:07 am Post subject:

I can't get these to embed, but here's my bucket. The Aurabesh says "HOPE."

https://photos.app.goo.gl/PR6PtFBG1k3aawHPA
https://photos.app.goo.gl/qedRtEPzRT2GmSWE7
https://photos.app.goo.gl/sJTbmfGxJLaCXsyLA
https://photos.app.goo.gl/ZgHzRB5nEhD5ej1a7
https://photos.app.goo.gl/bhpPyiXHfnNxctzcA

Bozzy () · Posted: Mon Nov 12, 2018 9:59 am Post subject:

Modded BS with my own Design

Merc_with_a_Bryar (Sam Falco) · Posted: Mon Nov 19, 2018 6:59 pm Post subject:

Here's my custom Resistance pilot helmet.

The pilot call sign for the pilot be "bloodstripe", hence the rough appearance of the Mohawk stripe. The symbol is my custom created "Inglourious Nerfherders" logo, which is a Nerf skull made of an inverted Alliance/New Republic/Resistance logo.

_________________
"I'm no Jedi. Just a guy with a Lightsaber, and a few questions." -Kyle Katarn

Member:
Ra Kura Base (Florida)
Stormfront Temple
Rebel Legion Knights of the Jedi Order
Galactic Stategic Command

choinierx (Thomas Choiniere) · Posted: Fri Nov 30, 2018 2:04 pm Post subject:

My fourth (!) Darth Hair build, this time for my wife's x-wing pilot. Need to dirty it up a bit, then just have to get boots and I think we're ready to submit her for approval.

The aurebesh on the back is an homage to my wife's college sorority, Kappa Delta, same for the primary green/white color scheme.

The Blue/white accents are for UNC Chapel Hill, where we met and first started dating.

The porg because she loves porgs and when I found the "Porg Battle Cry" vinyl decal, I couldn't help myself.
_________________

Forum and Costume Controls