Forum and Costume Controls

   FAQFAQ  SearchSearch  MemberlistMemberlist   UsergroupsUsergroups  medals.php?sid=62a843190ec36b34399750eba8835c76Medals   RegisterRegister   ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in

       
REMINDER: Do not change your e-mail address yourself. Please read this first for why.

Back to littlemac_747's profile       
Viewing costume :: Commander Thire
Costume

Character Profile


Commander Thire
Commander
Member:  littlemac_747 (Michael)
Active Legion Member
Dagobah Base
Character Name:  Commander Thire
Costume Type:  Clone and Old Republic Troopers
Formal/Canon
Species:  Human
Rank:
Commander
Trooper Class:
Shock Trooper Commander

Character/Costume Description

Helmet
Realistic style Clone Phase II helmet.
Armor is painted matte or satin white, with
red detail.
Mowhawk on dome is red.
Front chin area below frown is red.
Indented cheek areas are red.
Indented rear sections of helmet are red.
Front forehead section of the dome has 12
evenly spaced red vertical red stripes.
Front section of the aerator tubes have (6)
evenly spaced horizontal red stripes.
Black eye lens.
Helmet has a black brow band, just above
the eye lens, that extends around to the
back of helmet.
Grey indented helmet band around back of
dome.
The charcoal grey frown has 6 removed
teeth spaces.
Black mesh inside the helmet cover the
open pieces on frown.
Black vocoder greeble under chin area.
Black aerators with metal grills are
mounted inside the two indented front jaw
tubes at base of helmet.
(9) dark blue vertical hash marks on each
side of helmet cheek in front of ear column.
Ear caps are painted a dark grey, with
black
edges and two elongated black ovals
between the three grey elevated vertical
detail.
Indented vertical rectangle area with ribbed
detail on back of helmet is black.
Helmet has black scuff marks and scratches
on red areas expose underlying white.
Armor is weathered with shades of grey.
Pauldron
Realistic style ROTS Phase II Pauldron.
Pauldron has a black leather or vinyl base
with wedge shaped panel details.
Small angled shoulder plate with 3 panels is
attached to base over right shoulder and all
black.
Large angled shoulder plate with 4 panels is
attached to base over left shoulder.
Plate is black and panels are red.
Ammo strap attaches to front right of
pauldron base just above panel top edge.
Shoulder Armor
Realistic style ROTS Phase II shoulder
armor.
Shoulders are tear drop in shape with all
rounded edges.
Armor is painted matte or satin white and
covered with red.
Upper Arm Armor
Realistic style ROTS Phase II Upper Arm
Armor.
Armor is painted matte or satin white, with
red detail.
Two approximately 1/2 inch red stripes,
spaced approximately 1/2 inch apart,
encircle the lower part of the upper arm.
Armor has a front hard line outside edge
and inside rounded edge.
Armor piece has a dimple on the lower area
of the back of the arm.
(2) smaller white ammo boxes are attached
to the left arm on a white strap.
One ammo box is attached to the front, and
one is attached to the outside panel of the
bicep.

Elbow Armor
Realistic style ROTS Phase II Elbow Armor.
Armor is painted matte or satin white.
Elbow straps have a raised detail line at the
top and bottom of the strap.
Armor has two parallel dashed detail slots
on each outside edge of elbow at the strap
connection.
Elbows are mirror images of each other
with a notched area on the outside of the
elbow above the detail marks.
Forearm Armor
Realistic style ROTS Phase II Forearm
Armor.
Armor is painted matte or satin white.
Right forearm has a compad with (8) small
buttons, (1) large main button, and (1)
slightly smaller rectangular button closest
to the elbow.
Forearm tops have a flattened triangular
area with a ridge that comes to a point at
the top of the forearm.
Hand Plates
Realistic style ROTS Phase II Hand Plates.
Armor is painted matte or satin white.
Hand plates have a top curving ridge that
come to a point over the index or middle
finger just past the main knuckle of the
hand.
Chest Armor
Realistic style ROTS Phase II Chest Armor.
Armor is painted matte or satin white with
red detail.
Chest area is red, but does not carry over
front return edges.
Shoulder straps are white.
Two detail slots on right breast.
Chest and back armor match together at
the sides with no gap.
A seam line is present.
Shoulder straps are slotted into the detail
ridges of the chest to shoulder connection
points.
Chest Ammo Belt
Realistic style ROTS Phase II Chest Ammo
Belt.
(3) detailed white ammo boxes are
attached to a red strap on right side of
chest.
Back Armor
Realistic style ROTS Phase II Back Armor.
Armor is painted matte or satin white.
Back has a detail plate with four circles on
top, two elongated areas on left, and vents
on lower right.
Back and Chest armor match together at
the sides with no open gap.
A seam line is present.
Shoulder straps are slotted into the detail
back to shoulder connection points.
Abdomen Armor
Realistic style ROTS Phase II Abdomen
Armor.
Armor is painted matte or satin white.
Eight 1/4" diameter holes, with four holes
inside each indented channel of the
abdomen.
Abdomen section wraps around the wearers
body and is sealed at sides or at back.
Abdomen is completely contained under the
chest and back armor.
Armor aligns with codpiece with the seam
line hidden by the belt.
Codpiece and Posterior Armor
Realistic style ROTS Phase II Codpiece and
Posterior Armor.
Armor is painted matte or satin white.
Codpiece and Posterior armor connect at
the hips.
Belt
Realistic style ROTS Phase II Belt,
Beltboxes and Detonator.
Belt, boxes and detonator are matte or
satin black.
Belt front, between front boxes, has three
vertical rectangle indents which are spaced
apart by two protruding rectangle areas.
The rest of the belt is flat surfaced with
raised edging on top and bottom that run
along the rest of the belt.
Eight Belt Boxes are attached to Belt, with
four on each side.
The two largest Boxes are in front with
angled top surface that is higher toward the
center.
The smallest boxes are located behind the
front boxes, about 1/8 inch apart and have
an angled end on top.
The medium sized matching boxes, with flat
top cover, are about 1/8 inch from smallest
boxes.
Left rear box is spaced closer to detonator
and has two square buttons in the top left
corner, and two dashed indented detail
marks on bottom right.
Right rear box is spaced closer to detonator
and has a bar with two small cylinders
centered, and two dashed indented detail
marks on bottom left.
A detonator is centered and attached to
back of Belt.
Detonator tube is about 2 1/4 inch
diameter with wider detailed end caps.
Seven horizontally aligned square buttons
are on left side of tube, facing backwards.
Kama
Kama is made from a heavy material like
canvas or a tight weave burlap.
Kama is red with black border edge.
Lower center of Kama has a triangle split.
Kama aligns with front belt boxes.
Kama extends to the bottom of the knee
armor.
There are two straps from the Kama that
connect to a command buckle centered to
the front of the belt. Straps have metal
connector clips.
Holsters
Realistic style ROTS Phase II Holsters.
Holsters are painted black with grey details.
A grey inverted triangle is painted on the
upper front surface of each holster.
Holsters are sized for DC 17 Hand Blaster.
Holsters have flat extension straps that run
up and connect behind the second
(smallest) belt boxes to allow holsters to
hang over outside edge of each thigh.
Thigh Armor
Realistic style ROTS Phase II Thigh Armor.
Armor is panted matte or satin white with
red details.
A thin vertical red stripe travels the length
of the outside of each thigh, just forward of
center. Stripe is about 5/8 inch wide.
From that vertical line, two wide horizontal
red stripes extend to front armor ridge.
Stripes are about 1 1/8 inch wide.
Thigh Armor has a flat triangle area above
the knee which transitions to a ridge line
that extends up the front of the thigh to the
top edge.
Rear of armor has an indented area.
Armor is seamless.
No visible traces of how the armor was
assembled are shown.
Knee Armor
Realistic style ROTS Phase II Knee Armor.
Armor is panted matte or satin white.
Knees have a vertical protruding flat area in
front that extends down from top edge
about 2/3rds of knee.
Knees bend around the front and connect
to white detail clips that connect the back
strap on each side.
Back strap is white with grey raised center
strap and wraps around back of leg.
Armor has black scuff marks.
Lower Leg Armor
Realistic style ROTS Phase II Lower Leg
Armor.
Armor is panted matte or satin white and
covered with red.
Front of lower leg has a flat triangular detail
at the top which transitions to a ridge line
that travels down the front of the armor to
the ankle.
Back of the lower leg has an indented
arched area that continues down to the
ankle.
Bottom of the back side has an arched half
circle engraved line at the heel.
Armor is seamless, except where the calf
spoon connects to the back of the lower leg
indent edge.
Armor has black scuff marks, and scrapes
on red areas that expose underlying white.
Boots
Realistic style ROTS Phase II Boots.
Boots are red with primer grey colored
soles.
White, ankle high or tall enough to cover
the ankle and eliminate any black undersuit
visible at the ankle.
Boots are lace-less.
The boots have armor detail to include a
natural seam at the toe and a strap that
goes over the top of the foot with two
protruding disks at each side of the strap.
There are no markings or labels from the
shoe makers.
Boot soles are flat.
Boot soles are colored primer grey.

 

The Rebel Legion is a worldwide Star Wars costuming organization comprised of and operated by Star Wars fans. While not sponsored by Lucasfilm Ltd., it is Lucasfilm's preferred volunteer Rebel costuming group. Star Wars, its characters, costumes, and all associated items are the intellectual property of Lucasfilm. © 2019 Lucasfilm Ltd. & ™ All rights reserved. Used under authorization.


Powered by phpBB © 2001, 2005 phpBB Group