Forum and Costume Controls
REMINDER: Do not change your e-mail address yourself. Please read this first
|Viewing costume :: Jyn Erso
Jyn Erso from Rogue One,
version. All pieces handmade either
me, my husband and my momma.
Slate gray cotton with flap collar and
vertical darts on the front.
Stretch denim, black with navy
undertones. High-waisted with flap
closure and no pockets. 4 seams on
each leg with 8 pintucks on the
of each leg. Off-white strap at each
with weathered metal buckle. Two tan
leather rectangles next to each strap.
Brown cotton. Front has top-stitching
yellow-tan color stitches (with 3
accent lines of top stitching); collar,
waistband, and top of pockets also
topstitched in the same color. Two
horizontal strips of webbing, one over
each pocket. The right front has wider
brown webbing with a screen accurate
(Czech M60 bag) hook and 4 rubber
tubes. The left front has narrower
webbing and more rubber tubing; the
bottom of this tubing has a plastic end
cap and hangs freely. Inside, each
has another strip of narrow webbing
with rubber tubing anchored top and
bottom. The waistband has a 3D
"card device" on the left side, and 2
"hooks" on the right. A rectangle of
ALICE webbing is sewn under each
The back is hand-tacked to create
quilted effect. The lining is orange-
Weathered brown combat boots with
inside zippers removed and sewn
Two flaps made from the same brown
pleather cover the laces; the top flap
closes with hidden velcro. The lower
has a metal buckle modified from the
toe of a vintage Nordica ski boot; the
buckle's wire loop is attached with a
small leather flap.
Black Diamond "Stone" gloves dyed
dark brown. The stitching on the
has been reversed. The left has a
stitched onto the back of the hand;
right has a circle inset, with two half-
circle pieces of different colored
The wrist straps have been removed
and replaced and fasten with a snap.
Brown-black weathered leather belt
sets of 4 rivets on left front and back.
The belt closes with a hidden hook.
holster is made of the same colored
leather and attaches with snaps. The
holster's leg strap has 3 line snaps
one cap, as well as a keeper loop.
3D printed screen-accurate Blas Tech
180, hand-painted and weathered.
Vest Pocket Items:
Two mini-flashlights painted silver and
weathered are kept in the right
All items are weathered, primarily
acrylic paint and oil pastels.
Full album of photos can be viewed
|Pictures on other sites
Action pose 2
Back full body
Blaster in holster detail
Front full body
Left side full body
Right side full body
Shirt without vest, front
Vest detail of communicator card on waistband
Vest detail, webbing/tubing behind storm flap
Vest front left side
Vest lining and inside webbing/tubing